Doon Projects – Interior Designer and Construction company in Dehradun. This partition is made separately on the railing of steel and glass. It is made of 304 grade steel with a size of 50 mm and a gauge of 18 mm. They wanted a partition on that. The client was very concerned about the quality and finishing. The client is army retired, and has a lot of technical knowledge, he had more experience than us, for this he helped us in making the clamp. The photo of the clamp is given below.
18mm D Bracket and Clamp made by Steel 202 Glass holding bracket
In this we have used fiber mesh of 6.5 density and cutting is also done with 4 mm thick tool so that the finishing is perfect. To stop the sheet in the middle, clamps had to be made whose size was 18 mm. The job was a little late in making it, but in the end we too had a satisfaction. This was about 56 square feet of work, which cost around Rs 500 per square feet.
Doon Projects – Interior Designer and Construction company in Dehradun. Ashutosh ji is working in DRDO in Dehradun and a month ago we had built a temple in his house. Temple was built in WPC 12mm Material (Alex Black Cobra).
They needed a TV panel but the problem was the drawing room was small and the panel had to be put on window. The size of the panel was about 8 feet wide and 7 feet long. And his budget was only 25000 for this work which he had already told us.
We worked for this keeping the budget in mind, so that quality was also taken care of. It was made in MDF Action Tesa then painted duco Asian Paints. The finish of the paint was kept matte. The color white and teak was chosen after seeing the furniture that was made earlier in his house. It took a week to make it. He liked the design and was overjoyed after installing.
furniture transportation in progress by team
tv panel installed at home in dehradun
We designed the TV Panel by CNC Machine. The shape of Drawer and Teak Color Base and Shelf’s round corners was designed perfectly by CNC Router.
If you are looking for interior design service in Dehradun, you may contact us.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
Right now the interior work is going on, so the final video which is not finished will be uploaded soon.
It had to reflect light from inside the stone of the counter, for which a lot of efforts had to be made. For this, we bought the best Nano white stone, which was a stone of range of Rs 550 per square feet, we got it from the Nautiyal Marble which is on GMS Road. It also has LED lights from Philips and below light which is showing at the bottom of the counter is of Havells. All light are warm white shade. This counter has become very grand, it is a different fun to lay hands on it, the light that is coming out making is so smart and classic. This special counter is made for Mr. Mandeep Chouhan owner of The Colony Cafe, Raipur, Dehradun.
We have made some specials in their LED board as well. You can see in the video that it has been made by mixing with many materials and the color shade which is also good and it is a good thing that the expenditure has come to only Rs. 20,000. We have used Surya LED, Alex ACP Sheet, Appollo MS Pipes, Havells Wire, Alex WPC Sheet, etc.
We have built this temple for our most special clients, they were connected to us long back. She has spent a total of Rs 40,000 to build this entire temple. In which the entire covering of WPC Sheet has been done by our team. For mandir we have provide two side boxes and main 5ft by 3ft Temple. All material used here is branded Hettich Fittings, Action Brand HDMR Water Proof Board, Black Cobra WPC Sheet with Hollow Look and Havells LED inside.
This too was a amazing task. worked in the client army, he has just retired and has built a villa in Dehradun. They wanted a Jaali/ Grid boundary wall, then we have done it by doing excellent work. We have used 12mm WPC Jali with MS Framing of 1 inch with 2ft by 2ft Grid.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll
By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.
It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1.2 lakh rupees. In this, everything done from Duco paint is done in almost the entire house. Marble cost extra paid by the customer, marble was costing Rs. 60,000/- for this mandir design.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). This partition has been done for a doctor who lives in Prem Nagar, is a very young and new person. His taste is also good about design. He did some things in his own way while working, which made the work more beautiful. The total cost of doing this work was 21 thousand rupees, which includes the WPC sheet and all the ply and fittings.
32mm Thicker Plyboard used.
In this, we used Green‘s ply 18mm which had to be doubled, so that its thickness was 36mm, which is very important, you can also see our other work, in this kind of work, we always start by double ply board. After that, the laminate that we have applied in it is different on both the sides, on one side there is white laminate and on the other side in wooden finish, the cast is about 600 rupees per sheet. The LED Cov lights which are also included in it are from Crompton which is guaranteed for one year. You had to smile a little, you can see that no wire is visible, it has been wired to the board itself.
CNC Door Partition in Dehradun
After that you can see the slider we have slide the CNC Cutting Sheet in the video. Which is giving this design a better look, while there is no need for a slide, only the slider has been used to give it a freedom. The sheet that we have fitted in it is of Black Cobra Brand.
After that its sheet has been cut with Prince CNC Router which is done by 3mm Endmill tool which gives the best finish. The sheet used is high density wood and fiber sheet which is waterproof.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). Vijay ji works in a software company. His house is near Touchwood School on Sahastradhara Road. There are flats on both sides in the balcony due to which the privacy was disturbed. For this, they needed a partition that looked good and also cheap. In this partition, we have used two sheets, the top sheet is 12mm and the back 6mm thicker.
The top sheet has been cut with the help of CNC machine. And the back sheet has been fixed as it is. The Iron Framing was already done by the builder, with the help of star screw, the sheet has been attached. In this we have applied 1″ screws. The screw is placed at a distance of 2 feet.
The most difficult task in this was to mix the sheets together because the size was large. Our job’s width was 6 feet and 9 feet while the sheet is 4 feet and 8 feet. You can see in the photo how the sheet has been installed so that the design is also maintained. In this, if the LED light on the side went around, then the view could be better. But it has to be done according to the budget of the client.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
We have designed special WPC/Metal (Brand: Alstone) with Golden and White Acrylic (Brand: A-Caste) Letter’s name plate for Hathibarkala based client in Dehradun.
Special 18mm WPC Boundary Wall Jali Installed with Stainless Steel Framing on Mussoorie Rd, Dehradun in the House of Mr. Sanjay Choudhary Ji (V.S. Buildcon).
Material: 18mm WPC of Cobra in High Density
Weight: 25kg/board
Cutting Machine: Prince Router 6kw
Bit Used: 3mm
18ft by 6ft Jali Installed with acrylic sheet on the backside to block the view from bothside.
Designed Special Name Plate for Sahastradhara Road Based Client in Acrylic Metal with Silver Chain.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). There are very few clients from whom we get to learn the opposite. Duco Paint Finish, CNC Jali, Acrylic Golden Letter, ACP Sheet, Cabinet and what didn’t we do to build this temple. This work has been done on Canal Road which is a road adjoining Rajpur Road. We got this project online, the client had no budget problem, he just wanted good work.
Whatever material was used in it belonged to the Action Company and Paint of Asian Company. Whatever light work was done, it’s brand is Samsung. The most attractive thing in this is the door and the bells hanging on it. Its door is made of MDF Material, we made two 30mm thickness by pasting two boards together and then processed in CNC Cutting machine.
30 mm CNC MDF Door with Natural Wood Polish designed for Canal Road site in Dehradun.
After that we designed Krishna with the help of CNC machine on 8mm MDF sheet which is easily available even on the internet. Then painted it well in white. After that we put a gap of 2 Inch and put LED Strip on the side with the help of Sunboard. Then attached the design to the wall with the help of Star screw so that it can be easily removed and applied in future also.
8mm MDF with Duco Paint Finish and Samsung LED Strip designed for Canal Road based Villa in Dehradun.
Along with this, we also put Gayatri Mantra of Golden color on the side wall. It was mounted on Alex Sheet with the help of special screw which you can see in the photo. Everyone liked this work very much, it cost about 50 thousand. If you also want to do something similar in your home or office, then you can meet us at our workshop on Sahastradhara Road.
Designed Gayatri Mantra wall for Canal Road based Site in Dehradun.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services.
Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). If you are looking for CNC Laser Cutting, Jali Cutting, MDF, Mica, Ply, Acrylic Cutting in Dehradun then your are at right place. We just don’t cut the materials but we also design and execute this at your home or office. We are leading service provider in the industry, offering one stop, planned and effective CNC cutting services. We also provide laser cutting services, metal laser cutting services and other metals.
8mm MDF with Duco Paint Finish and Samsung LED Strip designed for Canal Road based Villa in Dehradun.
CNC Design on UV Sheet with LED Strip and Acrylic Sheet inside.
CNC Door Partition in DehradunCNC Cutted WPC Paneling Work/Jali Cutting work for Divine Resort Rishikesh
CNC Cutting done for Interior Designer of Dehradun
Specialty of CNC Cutting Machine:
12MM MDF with Variation depth half cutting
CNC Machining of Wood, Acrylic, Plywood, MDF, composite boards and more.
Fabrication services for Architects, Designers and Artists
State of the art tool
Experienced and highly skilled team
Cost Effective, great quality CNC cutting services in Dehradun
We provide banners Printing Service, posters Printing Service, exhibition displays Printing Service, signs Printing Service, boards Printing Service and vinyl graphics Printing Service. Our success is centered on our commitment to providing high performance machines and customized solutions meeting and exceeding global standards. We also provide the T-shirt for printing. We also offer litho, digital, specialist, large format and other printing services.
For quick quote click here. Write down your printable file size, media type you want and the number of copies. We accept all types of formats; PDF, EPS, JPEG, Corel File, Illustrator File, Photoshop File, CAD and all other printable formats.
There will complementary delivery services on order upto INR 5000. Designing cost will be additional in case of complex designs. Visit our studio for more information or get your work done with personal supervision. We have been servicing renowned builders, institutions, doctors, corporate and government offices from last 5 years. We also provide branding, packaging, outdoor hoardings, sunboard, pole kiosk, arrow pole signs and glow signs with best quality designing and fixture facility.
Contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Specialized is custom design services we also provide gift products like; customized stationary, pens, cups, table tops, calendar, etc..
Feel free to call at 99978-33350 (Mr. Sumit Pundeer) to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Wishing great day ahead.
Call us to schedule a meeting now: +91-7060504666 (Sumit Pundir). Office Location - Sahastradhara Rd, Dehradun. Dismiss
