Posted on

CNC Wall Paneling on Sahastradhara Rd, Dehradun

Vijay ji works in a software company. His house is near Touchwood School on Sahastradhara Road. There are flats on both sides in the balcony due to which the privacy was disturbed. For this, they needed a partition that looked good and also cheap. In this partition, we have used two sheets, the top sheet is 12mm and the back 6mm thicker.

The top sheet has been cut with the help of CNC machine. And the back sheet has been fixed as it is. The Iron Framing was already done by the builder, with the help of star screw, the sheet has been attached. In this we have applied 1″ screws. The screw is placed at a distance of 2 feet.

The most difficult task in this was to mix the sheets together because the size was large. Our job’s width was 6 feet and 9 feet while the sheet is 4 feet and 8 feet. You can see in the photo how the sheet has been installed so that the design is also maintained. In this, if the LED light on the side went around, then the view could be better. But it has to be done according to the budget of the client.

Specifications of the Material:

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.