Posted on Leave a comment

Pooja Room Designed in Mandakini Vihar Dehradun

HDMR Pooja Room in Dehradun
18mm HDMR Action Brand used with .8 SF 8088 Mica. Arch with 18mm WPC cutted with CNC Router Prince Brand. Base Sheed Om Design with Acrylic Milky White A-Cast Brand of 3mm. LED Used Phillips Brand Strip light with Original Adaptor.
Ganesh Ji CNC Door with MDF
7feet Height and 38 Inches Width Door made with 2 MDF Sheets 18mm+12mm Action Brand cutting done with Prince Brand Woodworking CNC Machine. Section above Door is made with ACP Partition Sheet 4mm of Alex Brand, vinyl sticker pasted on front side.

This design has been made for a special person who increased our budget after seeing our work and gave us an opportunity to build a temple in his house. This temple looks common, but you will understand its beauty when standing in front of it. It is made with the best material, even its finishing is very amazing. The entire 10 feet height has been designed. At first we had made a smaller plan than this.

But Shailesh ji asked us to make a slight change in the design which made its beauty even better. It has been made in just 3 days. It cost Rs 45,000 and we have built this temple for Rs 60,000. Only 15,000 labor and design have been spent in it.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

Pooja Room Designed with Marble and CNC in Dehradun

Italian Marble Pooja Room Interior
This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.
Ganesh Murti Copper with Italian Marble Backdrop
Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.
CNC Mandir Gate 30mm
Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.
Side Wall with 18mm WPC Jali
Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll

By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.

It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1 lakh rupees. In this, everything done from Duco paint is done in almost the entire house.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

July August Projects 2020 in Dehradun

Golden Acrylic Name Plate for Raiwala Site Dehradun
Black and Golden 3mm Acrylic Name plate made for Dehradun based client. Size is 14inch x 14inch.

Vinyl Sticker Dehradun
Designed for IT Park Located Cook House in Dehradun. Normal Vinyl printed with HP Printer, Pasting is also done by our team.

WPC Mandir CNC Design Dehradun
Complete mandir design with CNC Router and fixed with Bond. Sheet used 12mm WPC of HD Quality.

LED Board City Smiles Dental Clinic Dehradun
12×3 sqft LED Board. All material is Alex and Acrylic, fixing is also done by our team. Very good client experience.

UV Sheet Cutting Ganesh Ji CNC Dehradun
Special Marble look UV Sheet 3mm with Acrylic base. All cutting done by router CNC Machine.

UV Sheet Marble CNC Cutting Dehradun
Different stone shade of UV Sheet. Sheet is available in 8x4sqft size. Sheet require base to be fixed.

Posted on Leave a comment

Best 3D Max Designer Dehradun +919997833350

This is Sumit Pundir, 3D Max Artist in Dehradun. My location is Sahastradhara Road, Dehradun. I have completed more than 12 Residential and Commercial Projects and worked with several good interior designers of Dehradun like Naithani Ji, Fine Interior etc. If you have any project to work on and want to show your client the 3D House Tour or Project tour you may contact me at above given number. Some of my drawings shown here but I can not showcase my all work in this portfolio because I don’t have rights of this.

Square size table designed for Residential Project.

Sofa Set and CNC Wall Panel Designed for Dehradun based client.

Layout Plan for 1st Floor for Roorkee based client.

Kids bed design for Dehradun based client

Room and Office designed with a Partition.

Office Small size sofa set designed.

This is Clinic Layout designed for Dehradun based client – Size 23x9ft. Aluminium with 8mm Glass and Tuffon glass will be used for front. All furniture finish is natural wood.

 

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

CNC Mandir, Roof, Wall Partition Designed for Dehradun Based Client

Om Design CNC - 8mm painted with Normal Golden Color
Om Design CNC – 8mm painted with Normal Golden Color

Om Namay Shivay written with 3mm Acrylic - Red
Om Namay Shivay written with 3mm Acrylic – Red

Duco Painted 12mm WPC Sheet Partition
Duco Painted 12mm WPC Sheet Partition

Fitted with MS Pipe 1x1 inch with White Paint.
Fitted with MS Pipe 1×1 inch with White Paint.

8mm MDF Painted with normal dark blue paint

This work has been done for a very good architect who has just completed his studies, he has recently built a house in Dharampur, the whole house has been built by mixing modern and traditional themes. However the house looks very cute. In this, he made a small budget and the finishing came out fantastic.

It has a Green company MDF board which is 8mm, we had a lot of trouble in doing this work, if the board was 12mm then it was better. After that whatever the design was, it was Sharaddha ji who did the final after that, after harvesting, we had the goods reached his house. Then he painted his own painters with his painters and called us to fix them. The smile was the most difficult in this, and had to work hard to match it.

He had to apply Asian paint with white silicon, which was not a permanent solution. Bidding is the best option for him, but nowadays a sheet is being installed in this way only, so we also put it like this. After that, the sheet behind the temple is an acrylic sheet of white color A-Cast company which is 2mm thick. The kitchen partition that has been forged in it is a 12mm sheet of the Black Cobra Company on which they have painted. All the sheets are fixed with steel screws.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

CNC Wall Partition with Cove Lights in Dehradun

CNC Tree Partition in Dehradun

This partition has been done for a doctor who lives in Prem Nagar, is a very young and new person. His taste is also good about design. He did some things in his own way while working, which made the work more beautiful. The total cost of doing this work was 21 thousand rupees, which includes the WPC sheet and all the ply and fittings.

32mm Thicker Ply Board used with WPC Sheet
32mm Thicker Plyboard used.

In this, we used Green‘s ply 18mm which had to be doubled, so that its thickness was 36mm, which is very important, you can also see our other work, in this kind of work, we always start by double ply board. After that, the laminate that we have applied in it is different on both the sides, on one side there is white laminate and on the other side in wooden finish, the cast is about 600 rupees per sheet. The LED Cov lights which are also included in it are from Crompton which is guaranteed for one year. You had to smile a little, you can see that no wire is visible, it has been wired to the board itself.

CNC Door Partition in Dehradun
CNC Door Partition in Dehradun

After that you can see the slider we have slide the CNC Cutting Sheet in the video. Which is giving this design a better look, while there is no need for a slide, only the slider has been used to give it a freedom. The sheet that we have fitted in it is of Black Cobra Brand.

After that its sheet has been cut with Prince CNC Router which is done by 3mm Endmill tool which gives the best finish. The sheet used is high density wood and fiber sheet which is waterproof.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

Wooden & Glass Partition for Joshi Bhai

The size of partition is 9feet high and 6.5 feet wide. The total cost for this came to 21000 which is around 350 per sq ft. Depth of the partition is 10″. It would have been nice to have more depth than this but space would have taken a lot. The material that we have applied in it is 19mm Green Plywood which has been made 38mm thick by pasting it twice.

38mm Thicker Plywood Frame Fix with L Patti on Roof with 12mm Tuffon Glass

On top of that, they have used cheap colored laminate, which was found at the rate of 450 per square feet. Only this is an inexpensive thing because it was a little budget issue. Glass we used is 12mm Tuffon glass which comes to about 200 rupees per square feet. On top of that we have put a frosted sheet 3M by cutting with a plotter. In which a tree design has been made for design, the price of this sticker is Rs 100 per square feet.

Frosted Vinyl Sticker being Pasted Manually on Tuffon Glass

In this, we were trying to design CNC cutting first but later the mood changed because too much CNC work was done. It took a whole week to make it. The rest is in front of you. In this we can make very good design, if you are looking for something for your home, then contact us.

Final Picture of Glass and Wooden Partition done on Sahastradhara Road.

There is a story of a small box made in the side below, that glass was cut from the corner, which had a fan inside. But later we used it for partition. Now this will be used to put a flower vase.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

CNC, Laser, Jali Cutting in Dehradun (99978-33350)

If you are looking for CNC Laser Cutting, Jali Cutting, MDF, Mica, Ply, Acrylic Cutting in Dehradun then your are at right place. We just don’t cut the materials but we also design and execute this at your home or office. We are leading service provider in the industry, offering one stop, planned and effective CNC cutting services. We also provide laser cutting services, metal laser cutting services and other metals.

12mm WPC Jali Partition done at GMS Road Dehradun

Pooja Room Krishna Design with LED Strip
8mm MDF with Duco Paint Finish and Samsung LED Strip designed for Canal Road based Villa in Dehradun.

CNC Door Partition in Dehradun
CNC Door Partition in Dehradun

CNC Cutted WPC Paneling Work/Jali Cutting work for Divine Resort Rishikesh

CNC Cutting Services Dehradun
CNC Cutting done for Interior Designer of Dehradun

Specialty of CNC Cutting Machine:

  • 12MM MDF with Variation depth half cutting
  • CNC Machining of Wood, Acrylic, Plywood, MDF, composite boards and more.
  • Fabrication services for Architects, Designers and Artists
  • State of the art tool
  • Experienced and highly skilled team
  • Cost Effective, great quality CNC cutting services in Dehradun

Get your quick quote by clicking here: QUOTE – OFFICE BRANDING

We provide banners Printing Service, posters Printing Service, exhibition displays Printing Service, signs Printing Service, boards Printing Service and vinyl graphics Printing Service. Our success is centered on our commitment to providing high performance machines and customized solutions meeting and exceeding global standards. We also provide the T-shirt for printing. We also offer litho, digital, specialist, large format and other printing services.

For quick quote click here. Write down your printable file size, media type you want and the number of copies. We accept all types of formats; PDF, EPS, JPEG, Corel File Illustrator File, Photoshop File, CAD and all other printable formats.

There will complementary delivery services on order upto INR 5000. Designing cost will be additional in case of complex designs. Visit our studio for more information or get your work done with personal supervision. We have been servicing renowned builders, institutions, doctors, corporate and government offices from last 5 years. We also provide branding, packaging, outdoor hoardings, sunboard, pole kiosk, arrow pole signs and glow signs with best quality designing and fixture facility.

Contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Specialized is custom design services we also provide gift products like; customized stationary, pens, cups, table tops, calendar, etc..

Feel free to call at 99978-33350 (Mr. Sumit Pundeer)  to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Wishing great day ahead.