Posted on Leave a comment

Lighted Wall Mounted Tree Art for Home Decoration in Dehradun

Lighted Wall Mounted Tree Art for Home Decoration in Dehradun
Lighted Wall Mounted Tree Art for Home Decoration in Dehradun @ Rs. 35,000/-

 

We made this tree for Manish ji, who lives on Shimla bye pass road. He finalized the order in one meeting, his mind was clear about what and how to be made. There was to be a store area in a kitchen, followed by a temple which was of his mother’s choice and together with a TV cabinet storage, these were a total of 4 items.  Below you can see that we made all the things together in our workshop and the finish is the same in all.

12mm MDF designed with CNC Router
Matte Polish First Coat

 

Kitchen Storage area made racks with Plyboard and Laminates @ Rs. 28,000/-
Kitchen Storage area made racks with Plyboard and Laminates @ Rs. 28,000/-
18mm Plyboard with Normal Laminate Finish @ Rs. 12,000/-
12mm WPC Om Design on Wall Mounted Frame of Plyboard 18mm with Normal Mica Finish @ Rs. 10,000/-

Ply board and normal mica finish were used in all these items. MDF was used only in the tree, which belongs to the Action company. In this, Polish work was done by a very senior professional after which it was stopped on the wall with steel leaves.  The LED light was fitted with Philips and whatever board was used was from Green Company.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

UV and PVC Sheet Interior Design in Dehradun

Work done in association of Shanaya Decor – Rishikesh (Mr. Lalit Bitta). All material installed with highly skilled labour and all fittings and material is branded.

Delby Company PVC Wall Paneling done with Ganesh Ji UV Sheet Cut-out installed with Samsung LED Strip in Rishikesh
CNC Design on UV Sheet with LED Strip and Acrylic Sheet inside.
CNC False Ceiling Design on UV Sheet 4mm with Multicolor LED Strip and PVC Material also used for sides.
Posted on

October 2020 – miscellaneous works

4x4 Portrait Engraving
We engraved 18mm MDF Board and finished it with Teakwood matte Finish for this Painting. Frame is in Pinewood with same rough polish. Portrait is designed by senior artist after that we used Artcam Software to Engrave the designs in MDF by Prince CNC Router. We also providing Corian Stone Engraving and 3D Cutting Service in Dehradun.
Backfire Sign Board for Restaurant in Dehradun
Made and installed backfire antique sign on GMS Road, Dehradun. Front Sheet ACP Alex Brand, Side with 3mm Acrylic A-Cast Brand and Modules used Samsung, Letters raising 2″. Based Alex wooden sheet.
Navy Captain Name Plate in Dehradun
Designed and installed name plate in Dehradun by using 6mm A-Cast Acrylic Black, Letters with 3mm Golden Mirror Acrylic.
Posted on

Front Facade of Villa Designed in Vishwanath Envclave – Dehradun

Side Jali Size: 6ft width and 7ft Height. Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain
Jali Size: 4×4 – 3 Blocks Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain
Door Size: 7.5ft by 38inches Material: Choukhat Saal 6″x3″ Board – Action TESA 18mm Plyboard Duco Finish Paint on CNC Gloss Polish on Other Part
Leaf CNC Design in Zigzag Shape Material: Wooden Frame 6″x3″ WPC 18mm Black Cobra HD Frame 1″ Apollo Pipe

We always feel good working with engineers, it adds more to our work. The same happened in this work, in this we have used good material, but made a better design than that. It was tough job that the window sizes were not standard. So there was sheet wastage, we had to work with the joints. We managed the joints very well, you may see in the images.

Villa Facade designed in Dehradun for Mr. Rupam Bhatia Dehradun

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

Pooja Room Designed with Marble and CNC in Dehradun

Italian Marble Pooja Room Interior
This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.
Ganesh Murti Copper with Italian Marble Backdrop
Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.
CNC Mandir Gate 30mm
Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.
Side Wall with 18mm WPC Jali
Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll

By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.

It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1.2 lakh rupees. In this, everything done from Duco paint is done in almost the entire house. Marble cost extra paid by the customer, marble was costing Rs. 60,000/- for this mandir design.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

CNC Mandir, Roof, Wall Partition Designed for Dehradun Based Client

Om Design CNC - 8mm painted with Normal Golden Color
Om Design CNC – 8mm painted with Normal Golden Color

Om Namay Shivay written with 3mm Acrylic - Red
Om Namay Shivay written with 3mm Acrylic – Red

Duco Painted 12mm WPC Sheet Partition
Duco Painted 12mm WPC Sheet Partition

Fitted with MS Pipe 1x1 inch with White Paint.
Fitted with MS Pipe 1×1 inch with White Paint.

8mm MDF Painted with normal dark blue paint

This work has been done for a very good architect who has just completed his studies, he has recently built a house in Dharampur, the whole house has been built by mixing modern and traditional themes. However the house looks very cute. In this, he made a small budget and the finishing came out fantastic.

It has a Green company MDF board which is 8mm, we had a lot of trouble in doing this work, if the board was 12mm then it was better. After that whatever the design was, it was Sharaddha ji who did the final after that, after harvesting, we had the goods reached his house. Then he painted his own painters with his painters and called us to fix them. The smile was the most difficult in this, and had to work hard to match it.

He had to apply Asian paint with white silicon, which was not a permanent solution. Bidding is the best option for him, but nowadays a sheet is being installed in this way only, so we also put it like this. After that, the sheet behind the temple is an acrylic sheet of white color A-Cast company which is 2mm thick. The kitchen partition that has been forged in it is a 12mm sheet of the Black Cobra Company on which they have painted. All the sheets are fixed with steel screws.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

CNC Wall Partition with Cove Lights in Dehradun

This partition has been done for a doctor who lives in Prem Nagar, is a very young and new person. His taste is also good about design. He did some things in his own way while working, which made the work more beautiful. The total cost of doing this work was 21 thousand rupees, which includes the WPC sheet and all the ply and fittings.

32mm Thicker Ply Board used with WPC Sheet
32mm Thicker Plyboard used.

In this, we used Green‘s ply 18mm which had to be doubled, so that its thickness was 36mm, which is very important, you can also see our other work, in this kind of work, we always start by double ply board. After that, the laminate that we have applied in it is different on both the sides, on one side there is white laminate and on the other side in wooden finish, the cast is about 600 rupees per sheet. The LED Cov lights which are also included in it are from Crompton which is guaranteed for one year. You had to smile a little, you can see that no wire is visible, it has been wired to the board itself.

CNC Door Partition in Dehradun
CNC Door Partition in Dehradun

After that you can see the slider we have slide the CNC Cutting Sheet in the video. Which is giving this design a better look, while there is no need for a slide, only the slider has been used to give it a freedom. The sheet that we have fitted in it is of Black Cobra Brand.

After that its sheet has been cut with Prince CNC Router which is done by 3mm Endmill tool which gives the best finish. The sheet used is high density wood and fiber sheet which is waterproof.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

WPC Pooja Mandir in Dehradun

We got an opportunity to build a temple for my friend, we did a very good job and you can see in the photo that this temple has been prepared at a very low price, which cost only 20 thousand rupees. Because the wood that was to be put in the frame was already lying with them for the year, otherwise it would have cost upwards of 25 thousand.

7×4 Mandir Design using CNC, WPC, Mica, Board, Plywood

 

The cabinet it is made of is made from 18mm plywood. Which belongs to the Green Company. After that, both types of mica .4mm in and .75mm have been put on it. Fitting has also been used well in this.

18mm WPC for Om Design and 12mm WPC for side jali

 

The 6 design in it is cut on an 18mm cobra sheet and the sheet on the side is of 12mm, although I suggest that a sheet of less than 18mm should not be used. After this, the LED strip installed is the original of Havells which comes with a one-year guarantee.

19mm Board with Colored Texture Mica on Front and White Mica inside

 

The most beautiful look in it is of the door, which is made of 19mm board, white on the inside and colored mica on the outside. The bells in it are of brass which are fitted with M hooks.

Bells used with M Hook

It took a full time of one week, the size of the temple is 7 feet high and 3.5 feet square. It is most lovely when the door opens, then the sound of bells comes and its entire white is from inside.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

CNC Wall Paneling on Sahastradhara Rd, Dehradun

Vijay ji works in a software company. His house is near Touchwood School on Sahastradhara Road. There are flats on both sides in the balcony due to which the privacy was disturbed. For this, they needed a partition that looked good and also cheap. In this partition, we have used two sheets, the top sheet is 12mm and the back 6mm thicker.

The top sheet has been cut with the help of CNC machine. And the back sheet has been fixed as it is. The Iron Framing was already done by the builder, with the help of star screw, the sheet has been attached. In this we have applied 1″ screws. The screw is placed at a distance of 2 feet.

The most difficult task in this was to mix the sheets together because the size was large. Our job’s width was 6 feet and 9 feet while the sheet is 4 feet and 8 feet. You can see in the photo how the sheet has been installed so that the design is also maintained. In this, if the LED light on the side went around, then the view could be better. But it has to be done according to the budget of the client.

Specifications of the Material:

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

Branding done in Feb 2020 in Dehradun!!!

ACP Golden Letters installed for a Local Trader of Iron and other metals located on Mussoorie Road, Dehradun. ACP thickness was 3mm and letter raising of 1inch.
ACP Golden Letters installed for a Local Trader of Iron and other metals located on Mussoorie Road, Dehradun. ACP thickness was 3mm and letter raising of 1inch.

Acrylic letters pasted on texture wall with the help of 3M double tape. Letters thickness was 6mm.
Acrylic letters pasted on texture wall with the help of 3M double tape. Letters thickness was 6mm.

Eco Van branding done for Himalayan Power Machines located at Dalanwala Dehradun with Eco Printed vinyl.
Eco Van branding done for Himalayan Power Machines located at Dalanwala Dehradun with Eco Printed vinyl.

Standee designed and printed for Sahastradhara Heights a local real estate project located on Sahastradhara Road, Dehradun.
Standee designed and printed for Sahastradhara Heights a local real estate project located on Sahastradhara Road, Dehradun.

Complete branding like glass stickers, LED Board and all stationary designed for Face Mile Dental Clinic located on EC Road in Dehradun.
Complete branding like glass stickers, LED Board and all stationary designed for Face Mile Dental Clinic located on EC Road in Dehradun.

Glow sign board with LED Tubes provided to City Smiles Dental care clinic located on Subhash Road Dehradun
Glow sign board with LED Tubes provided to City Smiles Dental care clinic located on Subhash Road Dehradun

Glow Sign Board designed and installed for IT Faces an IT Institute located on Raipur Road, Dehradun.
Glow Sign Board designed and installed for IT Fames an IT Institute located on Raipur Road, Dehradun.

LED Board designed and installed on Rajpur Road for Mount Strong a brand new Gym on Rajpur Road.
LED Board designed and installed on Rajpur Road for Mount Strong a brand new Gym on Rajpur Road.

LED Board with Stand installed in Prem Nagar for a Chemist near Kamal Nursery, Dehradun.
LED Board with Stand installed in Prem Nagar for a Chemist near Kamal Nursery, Dehradun.

Steel Name Plate designed for a Villa Owner in Panache Valley Dehradun located on Sahastradhara Road.
Steel Name Plate designed for a Villa Owner in Panache Valley Dehradun located on Sahastradhara Road.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.