Posted on Leave a comment

Pooja Room Designed in Mandakini Vihar Dehradun

HDMR Pooja Room in Dehradun
18mm HDMR Action Brand used with .8 SF 8088 Mica. Arch with 18mm WPC cutted with CNC Router Prince Brand. Base Sheed Om Design with Acrylic Milky White A-Cast Brand of 3mm. LED Used Phillips Brand Strip light with Original Adaptor.
Ganesh Ji CNC Door with MDF
7feet Height and 38 Inches Width Door made with 2 MDF Sheets 18mm+12mm Action Brand cutting done with Prince Brand Woodworking CNC Machine. Section above Door is made with ACP Partition Sheet 4mm of Alex Brand, vinyl sticker pasted on front side.

This design has been made for a special person who increased our budget after seeing our work and gave us an opportunity to build a temple in his house. This temple looks common, but you will understand its beauty when standing in front of it. It is made with the best material, even its finishing is very amazing. The entire 10 feet height has been designed. At first we had made a smaller plan than this.

But Shailesh ji asked us to make a slight change in the design which made its beauty even better. It has been made in just 3 days. It cost Rs 45,000 and we have built this temple for Rs 60,000. Only 15,000 labor and design have been spent in it.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

Pooja Room Designed with Marble and CNC in Dehradun

Italian Marble Pooja Room Interior
This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.
Ganesh Murti Copper with Italian Marble Backdrop
Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.
CNC Mandir Gate 30mm
Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.
Side Wall with 18mm WPC Jali
Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll

By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.

It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1 lakh rupees. In this, everything done from Duco paint is done in almost the entire house.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

July August Projects 2020 in Dehradun

Golden Acrylic Name Plate for Raiwala Site Dehradun
Black and Golden 3mm Acrylic Name plate made for Dehradun based client. Size is 14inch x 14inch.

Vinyl Sticker Dehradun
Designed for IT Park Located Cook House in Dehradun. Normal Vinyl printed with HP Printer, Pasting is also done by our team.

WPC Mandir CNC Design Dehradun
Complete mandir design with CNC Router and fixed with Bond. Sheet used 12mm WPC of HD Quality.

LED Board City Smiles Dental Clinic Dehradun
12×3 sqft LED Board. All material is Alex and Acrylic, fixing is also done by our team. Very good client experience.

UV Sheet Cutting Ganesh Ji CNC Dehradun
Special Marble look UV Sheet 3mm with Acrylic base. All cutting done by router CNC Machine.

UV Sheet Marble CNC Cutting Dehradun
Different stone shade of UV Sheet. Sheet is available in 8x4sqft size. Sheet require base to be fixed.

Posted on Leave a comment

CNC Mandir, Roof, Wall Partition Designed for Dehradun Based Client

Om Design CNC - 8mm painted with Normal Golden Color
Om Design CNC – 8mm painted with Normal Golden Color

Om Namay Shivay written with 3mm Acrylic - Red
Om Namay Shivay written with 3mm Acrylic – Red

Duco Painted 12mm WPC Sheet Partition
Duco Painted 12mm WPC Sheet Partition

Fitted with MS Pipe 1x1 inch with White Paint.
Fitted with MS Pipe 1×1 inch with White Paint.

8mm MDF Painted with normal dark blue paint

This work has been done for a very good architect who has just completed his studies, he has recently built a house in Dharampur, the whole house has been built by mixing modern and traditional themes. However the house looks very cute. In this, he made a small budget and the finishing came out fantastic.

It has a Green company MDF board which is 8mm, we had a lot of trouble in doing this work, if the board was 12mm then it was better. After that whatever the design was, it was Sharaddha ji who did the final after that, after harvesting, we had the goods reached his house. Then he painted his own painters with his painters and called us to fix them. The smile was the most difficult in this, and had to work hard to match it.

He had to apply Asian paint with white silicon, which was not a permanent solution. Bidding is the best option for him, but nowadays a sheet is being installed in this way only, so we also put it like this. After that, the sheet behind the temple is an acrylic sheet of white color A-Cast company which is 2mm thick. The kitchen partition that has been forged in it is a 12mm sheet of the Black Cobra Company on which they have painted. All the sheets are fixed with steel screws.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

CNC Wall Partition with Cove Lights in Dehradun

CNC Tree Partition in Dehradun

This partition has been done for a doctor who lives in Prem Nagar, is a very young and new person. His taste is also good about design. He did some things in his own way while working, which made the work more beautiful. The total cost of doing this work was 21 thousand rupees, which includes the WPC sheet and all the ply and fittings.

32mm Thicker Ply Board used with WPC Sheet
32mm Thicker Plyboard used.

In this, we used Green‘s ply 18mm which had to be doubled, so that its thickness was 36mm, which is very important, you can also see our other work, in this kind of work, we always start by double ply board. After that, the laminate that we have applied in it is different on both the sides, on one side there is white laminate and on the other side in wooden finish, the cast is about 600 rupees per sheet. The LED Cov lights which are also included in it are from Crompton which is guaranteed for one year. You had to smile a little, you can see that no wire is visible, it has been wired to the board itself.

CNC Door Partition in Dehradun
CNC Door Partition in Dehradun

After that you can see the slider we have slide the CNC Cutting Sheet in the video. Which is giving this design a better look, while there is no need for a slide, only the slider has been used to give it a freedom. The sheet that we have fitted in it is of Black Cobra Brand.

After that its sheet has been cut with Prince CNC Router which is done by 3mm Endmill tool which gives the best finish. The sheet used is high density wood and fiber sheet which is waterproof.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

WPC Pooja Mandir in Dehradun

We got an opportunity to build a temple for my friend, we did a very good job and you can see in the photo that this temple has been prepared at a very low price, which cost only 20 thousand rupees. Because the wood that was to be put in the frame was already lying with them for the year, otherwise it would have cost upwards of 25 thousand.

7×4 Mandir Design using CNC, WPC, Mica, Board, Plywood

 

The cabinet it is made of is made from 18mm plywood. Which belongs to the Green Company. After that, both types of mica .4mm in and .75mm have been put on it. Fitting has also been used well in this.

18mm WPC for Om Design and 12mm WPC for side jali

 

The 6 design in it is cut on an 18mm cobra sheet and the sheet on the side is of 12mm, although I suggest that a sheet of less than 18mm should not be used. After this, the LED strip installed is the original of Havells which comes with a one-year guarantee.

19mm Board with Colored Texture Mica on Front and White Mica inside

 

The most beautiful look in it is of the door, which is made of 19mm board, white on the inside and colored mica on the outside. The bells in it are of brass which are fitted with M hooks.

Bells used with M Hook

It took a full time of one week, the size of the temple is 7 feet high and 3.5 feet square. It is most lovely when the door opens, then the sound of bells comes and its entire white is from inside.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

CNC Wall Paneling on Sahastradhara Rd, Dehradun

Vijay ji works in a software company. His house is near Touchwood School on Sahastradhara Road. There are flats on both sides in the balcony due to which the privacy was disturbed. For this, they needed a partition that looked good and also cheap. In this partition, we have used two sheets, the top sheet is 12mm and the back 6mm thicker.

The top sheet has been cut with the help of CNC machine. And the back sheet has been fixed as it is. The Iron Framing was already done by the builder, with the help of star screw, the sheet has been attached. In this we have applied 1″ screws. The screw is placed at a distance of 2 feet.

The most difficult task in this was to mix the sheets together because the size was large. Our job’s width was 6 feet and 9 feet while the sheet is 4 feet and 8 feet. You can see in the photo how the sheet has been installed so that the design is also maintained. In this, if the LED light on the side went around, then the view could be better. But it has to be done according to the budget of the client.

Specifications of the Material:

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

Wooden Name Plate at Hathibarkala Dehradun

Recently, a client of Hathibarkala, Dehradun demanded from us some special name plates of wood. He needed some antique and some durable work. For that, we designed a special name plate, for which first the ACP material plate was given a special shape with the help of CNC machine, which you can see in the photo.

Ganesh Icon Name Plate
Specially Designed Name Plate on ACP Wooden Finish Base with Golden 3mm Acrylics

 

In this, we designed the plate for both the poles, on one side, we designed Ganesh, in which also put the house number below. And on the other side, in whose name Rawat ji put his details. The client’s father finalized this design, after which we started work. The board on the side was made in the same way by picking up the golden colored acrylic letters on the ACP of Alex Brand, but here are some designs that you can see in the image below.

Acrylic and ACP Name Plate Design
Specially fixed with Heavy Studds on Tiles.

 

The client liked the job very much, the cost of the job was only Rs 3,500 and we installed it within only 4-5 days. If you too are making some special plans for your home, you can meet us, we work on Sahastradhara Road inside Mandakini Vihar.

Special Design Name Plate for Rawat Ji
Name Plate fixed with Hammer and Drill by our own team.

 

Apart from this, if you need any service from us like we do CNC and Laser cutting, also design the interior for the house and any work related to branding for your office, you can get us done, for more information you can Can view on our product page .: OUR PRODUCTS

Thanks for your time!

Posted on Leave a comment

Miscellaneous Products in November Month

Designer Name Plate in Dehradun
We have designed special WPC/Metal (Brand: Alstone) with Golden and White Acrylic (Brand: A-Caste) Letter’s name plate for Hathibarkala based client in Dehradun.

 

Boundary Wall Special Jali installed on Mussoorie Rd Dehradun
Special 18mm WPC Boundary Wall Jali Installed with Stainless Steel Framing on Mussoorie Rd, Dehradun in the House of Mr. Sanjay Choudhary Ji (V.S. Buildcon).

Material: 18mm WPC of Cobra in High Density
Weight: 25kg/board
Cutting Machine: Prince Router 6kw
Bit Used: 3mm

Boundary WAll Jali Design 2
18ft by 6ft Jali Installed with acrylic sheet on the backside to block the view from bothside.

 

Special Hanging Name Plate
Designed Special Name Plate for Sahastradhara Road Based Client in Acrylic Metal with Silver Chain.

Material: Acrylic 2mm Base, 3mm Letters White, Silver Chain
Cost: Rs. 1,500/-

Menu Card Designed for Black & White Restaurant
Menu Card Designed and Printed for Black and White Restaurant located on Mussoorie Road, Dehradun.

Material: 300gsm Art Paper with Matte Lamination – Total 8 Leafs Size: 6inch x 12inch
Cost: Rs. 200/-

Hanging Bathroom Symbol Sign
Special Bathroom Sign Plate in Acrylic with Black Base and Golden Letters made for Divine Resort Rishikesh

Bathroom Door Signs
Special International Standard Bathroom Signs for Male, Female and Disabled for Divine Resort, Rishikesh

Swimming Pool Sign
Designed Special Swimming Pool Arrow Sign for Divine Resort Rishikesh in Acrylic Sheet.

Posted on Leave a comment

WPC Boundary Wall at GMS Road – Dehradun

It is made for our most special clients whose taste is very good. She had to get some special partitions forged for the boundary wall at home. This house is located on GMS Road in Dehradun. In which a wall of about 100 feet was to be 2 feet high. Budget was also less in this and work can be seen in the photo.

12mm WPC Jali Partition done at GMS Road Dehradun
Boundary Wall Partition in 12 mm WPC Material

 

In this, most attention was given to design, they should have designed something different. He downloaded some photos from the net and sent to us, we made a similar design. The design has been prepared by combining two designs, you can see below how classic this pattern looks.

WPC Wall Partition Design
The Two Different Designed are used one by one to make a perfect pattern.र

 

High Density Material was used in it, which is about 70 rupees per square feet. In this, we have used material of Cobra company which is available from Kwality Hardware in Dehradun. We have also milled it very carefully because there is a danger of breakdown of the WPC in such fine work. This was about 5 sheets, which we had to fix at the client’s house. For which the client had already installed frames in MS and painted them on white.

MS Framing for WPC Fixing on Boundary Wall
1.5 x 1 inch MS Framing for WPC Sheet Fixing on Boundary wall.

 

Cobra Sheets used for Boundary Wall Partition
High Density Cobra Sheets used for partition design in Dehradun.

 

Star Pench was used for its fixing. The client liked the work a lot and we also learned more things to do by doing this work, so that we can work better now. If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services.

Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.