Posted on by — Leave a comment

Tin Shed in Mohbewala Dehradun for Dhanbeer Singh Ji

We have installed this tin shed in Mohbewala, Dehradun for retired army personal. In the meeting of half an hour, it was discussed how shed will be installed. The party paid advance same day because the next day was a Saturday. And in Hinduism, iron should not be brought into the house on Saturday. We gave them a 2D drawing in which the concept was clear.

We got the material delivered to the site in which all the material was from APL Apollo 18 Gouge. First of all we made trusses. After that the pillars were erected. 3in by 1.5in pipe was used in truss and 3in square in pillar. We used 1.5in square pipe for the purlins. Then red oxide primer was done on the shade. And later black paint. We did the paint and primer with an electric spray machine which did a beautiful job.

It took us 3 days to do this work. We worked to our satisfaction. Daanbir ji finalized for the red color sheet. We ordered gutter, ridge and tin sheets of red color with .45 mm thickness from Jindal Company. We got the next day material and it took us 1 day to install it. The area of ​​the shed was 900sqft and it cost the party Rs 150 per square feet. We were very happy to work there and the problem (dampness) due to which Daanbir ji got the shed installed got solved.

If you also want fabrication, interior or renovation service in Dehradun, then contact us. We operate from Mandakini Vihar, Sahastradhara. You can also contact us on phone – 7060504666.

Thank You!

Posted on by — 2 Comments

Bison Board Room Construction in Dehradun for Dr. Kamal Singh

Side Liner Sheet and Top Shed Fixed with Gutters at Prefabricated Room in Dehradun

It feels great to work with a person like the Supreme Being. Dr. Kamal ji, resident of Vishnu Lok has such a good heart and mind, that we may never forget him. Although he had invited us only for the shed of the car, But he also took the costing of the room. There was an area on his first floor which had to be covered. The area to be covered was 15 feet wide and 13 feet long. The meeting was completed in just 1 hour and we started the work next day. Below are the complete details.

Client Requirement:

  • 20ft by 20ft Tin Shed for Car.
  • 15ft by 13ft Room of Bison Board complete with tiles, paint and electric work.

Job Processing:

  • We first dropped the framing material on site.
  • Apollo’s pipes have lube. Before applying anti rust coat on it, it was cleaned with a cloth and Normal Thinner. So that the primer can get hold.
  • Red oxide was done on top of that.
  • The framing for the room was done by our senior fabricator Salman.
  • We used rafters for the roof and square pipes for the side walls.
  • First of all, we put the Liner Sheets on the side which was of white colour.
  • Proper waterproofing was the reason for applying the liner sheet from outside because water damages the Bison (cement-fiber) boards.
  • 6 mm thick bison boards were placed before the tin sheet on the roof.
  • The reason for keeping the bison board was the noise of the rain. It made a difference and it proved effective.
  • Red color sheet of .45mm Jindal company was applied on top of boards.
  • Sheet fixed with Self Drilling Screw. And all accessories like Gutters and top Ridges were fitted.
  • We started the electrical work after fixing the top sheet and outer sheet. In which the wiring was done as per the electrical plan.
  • After completion of electrical work that Bison boards were installed inside (Thickness 10mm).
  • Immediately after that we installed the tiles. In tiles, we used 2sqft tiles for room and 1sqft for terrace.
  • The tiles were set with dust (Poenta Dust) and cement (Ultratech).
  • After that the joint filling work of cement fiber board was done.
  • Putty, primer and paint were done after that. All the paint was Asian Paints and all the putty was JK Interior.
  • The paint job was done in white and all the rafters were kept in gray colour.
  • Finally, the tiles were thoroughly cleaned and grouted with Asian Paints Grout.

Materials:

  • Framing: APL Apollo Hollow Pipes, 2in square for walls, 3in by 1.5in for roof, .75in for bison board ceiling joint covering.
  • Sheets: Top JSW .45mm Pragati Sheet in Red Color, Outer .45mm JSW Liner in White Color, Inside 10mm Bison Panel Cement Fiber.
  • Electric: Havells HRFR Wires 1mm and 1.5mm, Polycab Pipes, Anchor Penta Switches, USHA Fans.
  • Tiles: Vitrified Tiles for interior in matt finish, Porch tiles 1ft by 1ft. Tile Grout Asian Paints.
  • Paint: Putty JK Interior, Paint Asian Paints Emulsion Shyne.

Costing:

  • Rs. 150/sqft Tin Shed
  • Rs. 60/sqft for Ceiling Bison Boards 6mm
  • Rs. 220/sqft for walls outer liner and interior bison board
  • Rs. 30/sqft for paint work
  • Rs. 150/sqft for Tiles in room and hall

If you want our Construction, Interior, Fabrication or Renovation service in Dehradun or nearby cities then you can contact us at 7060504666 (Sumit Pundir).

Thanks for your time!!!

Posted on by — Leave a comment

CNC Railing Installed at Tushar Ji’s House at Maldevta Dehradun

Another developer and another great job. This site was in Maldevta, very good work has been done by Tushar ji. He came to the shop with his friends and asked to do a site visit. Everything was finalized within 20 minutes and advance was received. Read the details for complete details about this project.

Client Requirement:

  • 1mtr Height Railing in Mild Steel CNC Design
  • CNC Jali Thickness required 2mm
  • Different designs for Staircase, front balconies and backside balconies.

Job Processing:

  • We first took the sizes of railing and told the total budget to the client.
  • After receiving the advance payment, we ordered the material at our workshop.
  • All the balcony railings were prepared at the shop itself and then installed at the site.
  • The first pillars were erected for the railing of the staircase. And framing was done, it was prepared on site.
  • CNC sheet was installed on the site in the railing of the staircase.
  • Finishing of railing was done by grinder.

Materials:

  • All 18 gauge Apollo pipes were used.
  • CNC Jali made of 2mm mild steel TATA HR Prime Material.
  • The tops of the pillars were made of Action TESA HDHMR Boards.

Costings:

  • Staircase Railing @ Rs. 1,250/running feet.
  • Balcony Railing @ Rs. 1,050/running feet.

If you want our Construction, Interior, Fabrication or Renovation service in Dehradun or nearby cities then you can contact us at 7060504666.

Thanks for your time!!!

Posted on by — Leave a comment

Tin Shed Insalled in Sisauni, Deoband, Saharanpur

The shed that has been built in Sisauni village has been built at the place of former Pradhan Sandeep Rana ji. He had an open chowk in the house which had to be covered. The area was big and had to be covered on double height. Although we are residents of Saharanpur but still we were contacted through online website.

We understood his need and gave him the budget. He has his own brick bhatta, so he has a lot of knowledge about this construction and fabrication field. He has an in-house architect, he finalised the color deed according to Vastu. After the consent of both, the work was started.

Client Demand:

  • Best quality shed.
  • 20ft Height in Double Slope
  • Color in Green and Red
  • Budget Work

Job Processing:

  • We bought iron from Deoband only. and delivered on site.
  • Red Oxide was done on the material.
  • First the truss was prepared, after that the pillars were erected.
  • Trusses were fixed, all pipe ends were closed.
  • After that the purlin was welded at a gap of 3ft.
  • The sheet was purchased from Selaqui, Dehradun only.
  • In this, the gutter was first installed and then the sheet was held with metal screws.
  • Ridges were installed at the top.
  • Proper silicone sealant was applied to the shade.
  • Shed was ready to serve Pradhan ji.

Material:

  • 18 Gouge APL Apollo Hollow Pipes
  • 3in Square for Pillars
  • 3in by 1.5 for Truss
  • 1.5 in square for Perlin
  • Primer Asian Red Oxide
  • Paint Asian Enamel
  • Sheet .45mm Jindal Latest Profile

Costing:

  • 150 per square feet.
  • 18% GST

Contact for your fabrication, construction and interior work at 7060-504-666 (Sumit Pundir).

Posted on by — Leave a comment

Tin Shed in Selaqui, Dehradun

Tin Shed Designed at Dehradun, Selaqui for Residential House

When you do some work repeatedly, then expertise comes in it. Now the challenge for us in tin shed work is what to give new. Because we are very happy to put the best tin shed in town. We are doing daily average 250 square feet shed work, we have 2 fabrication teams all are expert in their work. Our shades are better because we work very strong and durable. We completed this shed in just 16 hours and the party loved the work.

We have used .45mm sheet and all the pipes are of Apollo 18 gauge. Along with that all the accessories like gutter and ridge are used in .45mm. If you also want to do such work, then contact us today. Our workshop is on Sahastradhara Road. Details are below:

  • Material: 18 Gouge APL Apollo Hollow Pipes
  • Sheet .45mm Jindal Precoated with color warranty
  • Gutter and Ridges .45mm in Red Color
  • Primer Berger and Paint Asian
Posted on by — Leave a comment

Metal CNC Glazing for Uday Gaur Ji at Govind Vihar, Sahastradhara Rd

Metal Jali Designed for Uday Gaur ji at Govind Vihar, Sahastradhara Road, Dehradun

Uday Gaur ji is a forest officer, he has built his house in Govind Vihar. He has a sense of art, he contacted us for CNC jali work on some glazing on the building’s side. We showed him the physical samples which had both fiber and metal options. He finalized the metal and also selected the design from the online catalog of our website. Below are the details given.

 

Client Demand:

  • There was total 6 nos. glazing.
  • The client wanted a light gray colour.
  • The client wanted a cnc mesh/jali design that was not associated with any religion, a neutral design.
  • We had to do the entire work, in which framing and fixing would also be done by us.

Job Process:

  • We first went to the site and took the sizes. The sizes were different for all the areas. Even the size of the top and bottom of the window was also different.
  • Accordingly, we prepared frames which were made in 1 inch hollow pipe.
  • After finalizing the design, we adjusted them according to the size and sent them for cutting.
  • Laser cutting was done with oxygen gas and the mesh was made on 2mm sheet.
  • The mesh was welded to the frame and finished.
  • After that enamel paint was done in gray color in which first primer and then enamel paint was done.
  • Then we delivered the finished materials to the site and fixed all with the help of L connectors.

Materials:

  • Frame pipe: APL Apollo Hollow Section 1in Square Gouge 18
  • Jali: TATA Prime Material HR Sheet 2mm Thickness
  • Paint: Duco RAL Grey, Primer Grey

Costings:

  • Framing @ Rs. 40/sqft
  • CNC Metal Jali @ Rs. 250/sqft
  • Duco Paint @ Rs. 90/sqft
  • Fixing @ Rs. 20/sqft

Posted on by — Leave a comment

Doon Grammar School Steel Sign Board in Dehradun

Doon Grammar School Athoorwala Dehradun LED Board

The owner liked our concept and order was finalized in 30 minute meeting. He did not bargain even a single rupee so the pressure has come on us to give our best quality. The owners of the school were very clear what they wanted.

Demand of Client:

  • He had already left a space in the middle of the gate on which the sign board of the school was fixed.
  • They wanted 3D letters of steel.
  • He wanted a blue color background.
  • They didn’t want light in the board, they were going to put the focus lights from above.
  • They wanted the board soon, we had only 8 days time.
Danish Bhai working on LED Board of Athoorwala Doon Grammar School Board
Danish Bhai working on LED Board of Athoorwala Doon Grammar School Board

Process:

  • We started work by taking 50% advance.
  • In this, first of all, we did the framing on the site in which 1.5 inch square and 1 inch square pipe was used.
  • After that, after doing red oxide treatment on the frame and joint filling, we placed an order for the peneling sheet.
  • We ordered Alex Brand wrap sheets and the sheets were delivered to us the very next day.
  • Also we got the letters laser cut and started welding.
  • After all the letters are ready, we fix the nut bolts in the letters so that they are firmly fixed on the paneling sheet.
  • After that we prepared the board completely and welded it on the above site.
  • Small letters we pasted directly with the help of heavy gumming.
  • After that we got the logo done installed it as well.
  • Cleaned and finalized the board after completion.

Materials:

  • FRAMING: 1.5in Square APL Apollo Pipe for Main Frame and 1in Square for collar.
  • SHEET: ALEX ACP Sheet Exterior Grade in Navy Blue Color
  • LETTERS: 20 Gouge Steel 304 Grade with MIG Welding
  • LOGO: Itching with Black Color on SS

Costings:

  • Letters @ Rs. 150/height-inch
  • Base @ Rs. 200/sqft
  • Installation @ Rs. 5,000/unit
Posted on by — Leave a comment

Pergola Designed for CP Joshi Ji, Shimla Bye Pass, Dehradun

Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350).  We have done a lot of work with the engineers. And every time one gets to learn from them. Joshi ji leave at Prakash Lok Colony near Shimla Bye Pass. They contacted us through our website and was very clear about what they wanted.

Demand of Client:

Joshi ji has given the above portion on rent. They didn’t have tiles on the porch so they wanted to avoid rain water at the same time they needed sunlight. The did not have any budget issue and was aware about the price range.

Area:

Pergola area was 23ft Depth and 26ft Width. It was to be fixed on ground floor roof. In this, we made a grid of 3ft, in which 3in by 1.5in Apollo pipes were used. We have given 6in tails in front to make our design look more beautiful.

Materials:

  • We used 3in Square for Pillars.
  • For Grid we used 3in by 1.5in Hollow Pipe
  • We painted it white with Asian Paints Emulsion
  • Sheet we used was 2mm Polycarbonate Frosted Sheet.

 

Posted on by — Leave a comment

Pergola Designed at Mohkampur, Dehradun

Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). Sunil ji took a very quick decision and started the work by giving evening day advance. His test is very good, he was very clear what he want. It took us 5 working days to do this work. Pergola size was 17ft by 11ft. We kept its color white, we applied enamel of white color over it by Asian Paints. We used Apollo 18 gauge pipes and kept some 20 gauge pipes as well. Because costing had to be managed as well as strength. Making more strong than necessary also makes a difference in costing and its waste of money.

The size of the grid we have kept here is 2.5 feet by 2.5 feet. And 3in b 1.5in pipes have been used vertically. In the front of this pergola we have made a 6 inch tail which is giving it more beauty. In this we have used polycarbonate sheet of 2mm. This pergola is a product of the range of Rs.270 per feet.

There was one late decision in this work, the pillar you see in some of the images was removed later. Due to this the pergola was

 

looking grand from below. If you also want to do some such work like fabrication, interior or renovation, then we are providing very good services in Dehradun. We are operating our workshop from Sahastradhara Road, you can also come and meet us and you can also call us at your place.

Posted on by — Leave a comment

Veener False Ceiling Completed for Jai Prakash Ji’s Residence in Dehradun

Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). Jaiprakash ji has great knowledge about all technical work at home. Retired from government job but what a wonderful man. Describing the name of our company as very good, they put a lot of pressure on us to do good work. It was a very simple and classy work but it took a lot of time to do it.

First we finalized the design, his son who lives in Canada sent all the designs. After finalizing the design, we started the work of POP, it was an area of ​​about 1000 sqft, so it took more than 10 days to do it. In this, we used prime channels, used heavy wali mess and used POP material of Sakarni Brand. You can see in the image below what is the finish after pop.

 

After this, MDF paste was done in the lobby area, in which 4mm Action TESA MDF was pasted with the help of fevicol and nails. And the ply was fixed in the lower drawing room area. We had already put channels where the ply was to be fixed. After that a veneer was applied on the ply, in which we applied a 4 mm thick Greenply veneer. In exterior work of Delby WPC Lowers was done. You can see the images of the complete work. We have also given the video for more information.