Posted on — Leave a comment

CNC Wall Partition with Cove Lights in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). This partition has been done for a doctor who lives in Prem Nagar, is a very young and new person. His taste is also good about design. He did some things in his own way while working, which made the work more beautiful. The total cost of doing this work was 21 thousand rupees, which includes the WPC sheet and all the ply and fittings.

32mm Thicker Ply Board used with WPC Sheet
32mm Thicker Plyboard used.

In this, we used Green‘s ply 18mm which had to be doubled, so that its thickness was 36mm, which is very important, you can also see our other work, in this kind of work, we always start by double ply board. After that, the laminate that we have applied in it is different on both the sides, on one side there is white laminate and on the other side in wooden finish, the cast is about 600 rupees per sheet. The LED Cov lights which are also included in it are from Crompton which is guaranteed for one year. You had to smile a little, you can see that no wire is visible, it has been wired to the board itself.

CNC Door Partition in Dehradun
CNC Door Partition in Dehradun

After that you can see the slider we have slide the CNC Cutting Sheet in the video. Which is giving this design a better look, while there is no need for a slide, only the slider has been used to give it a freedom. The sheet that we have fitted in it is of Black Cobra Brand.

After that its sheet has been cut with Prince CNC Router which is done by 3mm Endmill tool which gives the best finish. The sheet used is high density wood and fiber sheet which is waterproof.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

Wooden & Tuffen / Toughened Glass Partition for Joshi Bhai

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). The size of partition is 9feet high and 6.5 feet wide. The total cost for this came to 21000 which is around 350 per sq ft. Depth of the partition is 10″. It would have been nice to have more depth than this but space would have taken a lot. The material that we have applied in it is 19mm Green Plywood which has been made 38mm thick by pasting it twice.

38mm Thicker Plywood Frame Fix with L Patti on Roof with 12mm Tuffon Glass

On top of that, they have used cheap colored laminate, which was found at the rate of 450 per square feet. Only this is an inexpensive thing because it was a little budget issue. Glass we used is 12mm Tuffon glass which comes to about 200 rupees per square feet. On top of that we have put a frosted sheet 3M by cutting with a plotter. In which a tree design has been made for design, the price of this sticker is Rs 100 per square feet.

Frosted Vinyl Sticker being Pasted Manually on Tuffon Glass

In this, we were trying to design CNC cutting first but later the mood changed because too much CNC work was done. It took a whole week to make it. The rest is in front of you. In this we can make very good design, if you are looking for something for your home, then contact us.

Final Picture of Glass and Wooden Partition done on Sahastradhara Road.

There is a story of a small box made in the side below, that glass was cut from the corner, which had a fan inside. But later we used it for partition. Now this will be used to put a flower vase.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

WPC Fiber Sheet with CNC Pooja Mandir in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). We got an opportunity to build a temple for my friend, we did a very good job and you can see in the photo that this temple has been prepared at a very low price, which cost only 20 thousand rupees. Because the wood that was to be put in the frame was already lying with them for the year, otherwise it would have cost upwards of 25 thousand.

7×4 Mandir Design using CNC, WPC, Mica, Board, Plywood

 

The cabinet it is made of is made from 18mm plywood. Which belongs to the Green Company. After that, both types of mica .4mm in and .75mm have been put on it. Fitting has also been used well in this.

18mm WPC for Om Design and 12mm WPC for side jali

 

The 6 design in it is cut on an 18mm cobra sheet and the sheet on the side is of 12mm, although I suggest that a sheet of less than 18mm should not be used. After this, the LED strip installed is the original of Havells which comes with a one-year guarantee.

19mm Board with Colored Texture Mica on Front and White Mica inside

 

The most beautiful look in it is of the door, which is made of 19mm board, white on the inside and colored mica on the outside. The bells in it are of brass which are fitted with M hooks.

Bells used with M Hook

It took a full time of one week, the size of the temple is 7 feet high and 3.5 feet square. It is most lovely when the door opens, then the sound of bells comes and its entire white is from inside.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

LED Board for Sai Dental Clinic, Raipur Road Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). It felt very good today, and after a long time we did our work of choice. It often happens that when the client leaves the work on us, a different pressure comes to give the work better.

Dental Clinic LED Board Design in Dehradun
LED Board designed using Samsung LED Modules, ACP Sheet on Base, MS Framing of 1 inch, Vinyl Stickers on Logo, Letters with Acrylic Sheet and Raising 1inch with ACP White Sheet.

You can see this work, in this we put the LED board in the front, the vinyl sticker on the inside and the sticker on the front glass, which has also been laminated from the top. We have done this work for Sai Dental Clinic, one of whose branches is also in Chamba. Doctor sahab are very good human being and we felt good working with him. In this, we have used material of superior quality. The sheet which is fitted on the base is ACP and the letters made are made of 3mm acrylic sheet.

Vinyl Sticker on Glass
Transparent Vinyl printed with ECO Solvent Machine and Matte Lamination pasted on it.

In this, we have also fitted branded modules and no LED Strip, people in Dehradun are using strip and that is not long lasting solution for light. The vinyl is printed on the logo, which is giving a perfect look to this board. There was confusion in the color combination initially because Dr. Saheb wanted a little dark color but later when he saw the board, he liked it. The name written in it are a little less visible because in that we emptied the sheet with a CNC machine. Acrylic sheet is attached at the back on the back.

Reception Counter Branding
Vinyl Pasted on Reception Counter

Right now the stationary and other work is also incomplete for which the color scheme and the standard has been finalized, whatever work will be done now, it is already known that which color font will be used.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.