Doon Projects – Interior Design and Construction company in Dehradun.We got to do a little CNC, HPL, Polish work near the Graphic Era University in Clement Town for a retired army officer. There was some hpl paneling on front elevation, drawing room ceiling cnc work and mandir arch work In the front elevation, the high-pressured laminate was to be fitted in the front on borders of CNC Jali.
HPL Sheet on Front Elevation with CNC lit Jali in Center part. Apollo MS Framing with Red Oxide Treatment
HPL 6mm Sheet on Outer Sides
12mm WPC Jali with CNC Router cutting with back milky white acrylic 2mm Wipro LED Rope Light
Action TESA MDF CNC Cutting
Asian Paints Polish on MDF
Acrylic Sheet on the back of MDF Jalis
Action TESA MDF CNC Arch with Polish
Wipro LED and 2mm Milky White Acrylic
Doon Projects – Interior Designer and Construction company in Dehradun. CNC Front Elevation with 12mm WPC Fiber Jali waterproof material in white color. We provide modern designs, fully customized as your requirement. The WPC mesh that is visible here, we have installed it in a house located on Canal Road. This type of design takes a little more time, so its casting also comes less than normal. We also have our own team of fabrication, so we complete and give the project.
TIMELINE:
Order finalised with 70% advance payment for material.
Frame completed next day.
Paint with Red-oxide completed on 3rd day.
Jali installed on 5th Day.
In this, we also give paint along with primer, frame and paint will have to be charged separately, which will cost you from Rs 50 to Rs 150 per square feet, according to the need. The jali that is visible here has 4-foot squares in it, in which we have used a 1.5-inch Apollo company‘s hollow pipe. The WPC used in this is taken from Kwality Hardware, this is a 12 mm thick sheet of Black Cobra brand. If you also want to use this type of mesh in your home, then you can take our services.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 9997833350).
Size: 4ft by 9ft
Base Material: HDHMR 16.75 mm Action Tesa
Finish: SF Laminate 1mm
Slab Finish: UV Marble Sheet 6mm
Backdrop: 12mm WPC with CN Cutting
Hanging Bells and Top Space Covering Included
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
We made this tree for Manish ji, who lives on Shimla bye pass road. He finalized the order in one meeting, his mind was clear about what and how to be made. There was to be a store area in a kitchen, followed by a temple which was of his mother’s choice and together with a TV cabinet storage, these were a total of 4 items. Below you can see that we made all the things together in our workshop and the finish is the same in all.
Ply board and normal mica finish were used in all these items. MDF was used only in the tree, which belongs to the Action company. In this, Polish work was done by a very senior professional after which it was stopped on the wall with steel leaves. The LED light was fitted with Philips and whatever board was used was from Green Company.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
We always feel good working with engineers, it adds more to our work. The same happened in this work, in this we have used good material, but made a better design than that. It was tough job that the window sizes were not standard. So there was sheet wastage, we had to work with the joints. We managed the joints very well, you may see in the images.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
This design has been made for a special person who increased our budget after seeing our work and gave us an opportunity to build a temple in his house. This temple looks common, but you will understand its beauty when standing in front of it. It is made with the best material, even its finishing is very amazing. The entire 10 feet height has been designed. At first we had made a smaller plan than this.
But Shailesh ji asked us to make a slight change in the design which made its beauty even better. It has been made in just 3 days. It cost Rs 45,000 and we have built this temple for Rs 60,000. Only 15,000 labor and design have been spent in it.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
This work has been done for a very good architect who has just completed his studies, he has recently built a house in Dharampur, the whole house has been built by mixing modern and traditional themes. However the house looks very cute. In this, he made a small budget and the finishing came out fantastic.
It has a Green company MDF board which is 8mm, we had a lot of trouble in doing this work, if the board was 12mm then it was better. After that whatever the design was, it was Sharaddha ji who did the final after that, after harvesting, we had the goods reached his house. Then he painted his own painters with his painters and called us to fix them. The smile was the most difficult in this, and had to work hard to match it.
He had to apply Asian paint with white silicon, which was not a permanent solution. Bidding is the best option for him, but nowadays a sheet is being installed in this way only, so we also put it like this. After that, the sheet behind the temple is an acrylic sheet of white color A-Cast company which is 2mm thick. The kitchen partition that has been forged in it is a 12mm sheet of the Black Cobra Company on which they have painted. All the sheets are fixed with steel screws.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). This partition has been done for a doctor who lives in Prem Nagar, is a very young and new person. His taste is also good about design. He did some things in his own way while working, which made the work more beautiful. The total cost of doing this work was 21 thousand rupees, which includes the WPC sheet and all the ply and fittings.
In this, we used Green‘s ply 18mm which had to be doubled, so that its thickness was 36mm, which is very important, you can also see our other work, in this kind of work, we always start by double ply board. After that, the laminate that we have applied in it is different on both the sides, on one side there is white laminate and on the other side in wooden finish, the cast is about 600 rupees per sheet. The LED Cov lights which are also included in it are from Crompton which is guaranteed for one year. You had to smile a little, you can see that no wire is visible, it has been wired to the board itself.
After that you can see the slider we have slide the CNC Cutting Sheet in the video. Which is giving this design a better look, while there is no need for a slide, only the slider has been used to give it a freedom. The sheet that we have fitted in it is of Black Cobra Brand.
After that its sheet has been cut with Prince CNC Router which is done by 3mm Endmill tool which gives the best finish. The sheet used is high density wood and fiber sheet which is waterproof.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). Vijay ji works in a software company. His house is near Touchwood School on Sahastradhara Road. There are flats on both sides in the balcony due to which the privacy was disturbed. For this, they needed a partition that looked good and also cheap. In this partition, we have used two sheets, the top sheet is 12mm and the back 6mm thicker.
The top sheet has been cut with the help of CNC machine. And the back sheet has been fixed as it is. The Iron Framing was already done by the builder, with the help of star screw, the sheet has been attached. In this we have applied 1″ screws. The screw is placed at a distance of 2 feet.
The most difficult task in this was to mix the sheets together because the size was large. Our job’s width was 6 feet and 9 feet while the sheet is 4 feet and 8 feet. You can see in the photo how the sheet has been installed so that the design is also maintained. In this, if the LED light on the side went around, then the view could be better. But it has to be done according to the budget of the client.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Call us to schedule a meeting now: +91-7060326021, 7060504666 (Amit Pundir). Office Location - Sahastradhara Rd, Dehradun. Dismiss