We are getting all the projects with engineers only, don’t know whether this is good or bad. Ajay Bisht is an engineer by profession and we got the opportunity to work at his place. A client has come from Chandigarh that day, and madam came to discuss our for their house renovation and paid advance at the same time. Madam was clear about what she wanted. We are mentioning the scope of work in the below points.
The kitchen area had to be developed, the roof had to be extended there and the kitchen had to be developed on top of it.
There was an open terrace outside so there was a leakage issue, it had to be converted into a hall.
It was to be developed like a party hall which would have an open kitchen and a powder room.
Mussoorie view was not available from above, so the roof had to be extended and a deck type structure was made above so that the view could be obtained.
We had to do all the plumbing, tiles, masonry, fabrication and electrical work from start to end. This project was mostly in prefabrication.
Later, we also had to build an entry ramp for them. It was difficult as all this work had to be done during the rainy season.
It took us more time to complete the project because of the rain. We had the issue of leakage which wasted a lot of our time because the side wall was dead from the neighbour’s end and was getting wet again and again. This project was a low budget project, minimal expenditure was incurred in the project by using cost effective things. Photos and videos of the project will be available on our YouTube channel. We are also embedding a video below. Will upload photos soon.
This post may be useful to you for prefabrication and light-weight construction. In this you can see how heavy water tanks and solar can be kept on top of the shed, we have completed this project on the banks of Ganga at Tapowan in Rishikesh which includes 3200sqft Tin Shed, 6000 liter water tank stand and 2000 liter solar geyser facility.
6000 Litre water tanks stand installed in Rishikesh UttarakhandWater Solar Geyser Installed at Rishikesh UttarakhandWater Solar Geyser Installed at Rishikesh Uttarakhand
This is a prefab shed, in which prefabricated rooms will be made, in it all the pillars will be concealed in the brick. There will be gypsum ceiling at the bottom of the truss which will also have soundproofing and weatherproofing facility and will give the feel of a civil house, nowadays it is better to do prefabricated construction on the top level. According to the room layout these pillars have been cast. This is also easy because the pillar plate is welded to the column’s bar. The clear height of the shed was kept at 9.5ft and after ceiling the client would get a height of 9ft. Center height of shed is 12.5ft. In this, trusses have been placed at a gap of 10 feet.
Initially there was no confirmation of placing the solar overhead that the party had planned at the end moment, otherwise the truss in the solar wale shed is placed at a distance of 7ft and the backside part of the solar geyser is where the tank remains above it. it is very good. Solar geyser cost Rs. 60,000 per 500 liter in which 50% of your money is returned as subsidy, where 4 units are installed the cost is Rs. 2 lakh 40,000. Talking about the water tank stand here, this tank is of 1,000 liters and its stand is at least 160 sqft. it costs Rs. 8,000 per tank. There are 6 tanks here so this stand party costs Rs 50,000. We charged Rs. 170 per square feet for the shed, because access to material here is a bit costly and this work is done on the 3rd floor, otherwise our standard rate is Rs 150/per sqft. Our experience with Party was very good, we worked hard and made a lot of changes during the work, which was a bit difficult, but our expert welders handled the challenges well and completed this project.
The party also liked this work, he also got the glazing and elevation work done, the updated video of which we will put on the channel soon. All the material in it is APL Apollo 18 Gouge and the sheet applied on top of the shed is of .45mm JSW Brick Red color. Gutters are of white color which are specially customized because more than 1,000 sqft area water is coming in the gutter, for that there should be a gutter of at least 6in by 4in.
This project was completed in 1 month because the water tank stand was made by taking out pillars from the shed. You can see the height of the water tank in it, it is 7ft higher than the shed top level which can provide proper supply to the tank of the solar geyser installed on the shed and also maintain the water pressure.
Also keep this in mind, the distance from tank to tank should be at least 6ft, here the gap should be a little less, because the truss was at our place, we told you earlier also that there should be a gap of 7ft between the trusses to help and better. ho jata. You first decide whether to invest in solar future or not.
If you also want to get construction, renovation, interior work done in Dehradun or nearby cities, you can always contact us. Thank you for your time.
In this we have given glazing on the side in which we have placed a glass openable. In this we have used 4mm glass with blue tint.The sheet is Tata brand Infinia whose thickness is .45mm. Minimum slope is given in it. The shade does not look good if it is given too much slope.In the tin shed, we have given PVC Gutters which are of Supreme brand. The shade sheet color is white and off white color is used on the structure.
Mukesh Barthwal ji is our client from Dehradun, he has built a floor above old construction for which we have done complete fabrication work. In this, first of all we increased the size of the balcony at the back of ground floor, it was very less we increased it from 2.5 feet to 5 feet. In the metal floor, we made grid of one and a half feet by 2 feet and welded a 3 mm metal sheet over it. On top of that, they put tiles.
Next we provided 3 feet by 1 feet steps in Staircase. In this, after four steps, we provided a ramp and then took Jeena straight to the terrace. It cost only ₹40,000 to the client and it was made into a complete Apollo MS hollow pipe.
After metal floor & staircase we installed the 3ft high railing on first floor and 1.5 feet high on the top floor. The design of CNC used which is connected to nature and is made of 3 mm MS sheet.
We advised Barthwal ji to reduce the cost of 80 rft railing which costing him ₹80,000, because the construction contractor can provide the parapet in the construction budget. So we ordered his contractor to give 1.5ft solid concrete parapet over the 1st floor roof. Then we installed the railing of 1.5ft high and that reduced the railing budget by 40%. It cost less money but looked better than the ground floor railing.
Barthwal ji wanted transparent Pergola on the front side so that his windows could be covered from rain and the elevation of his house could also be improved. For this, we gave them a cost effective solution in which polycarbonate 2 mm sheet were installed over 3/3 ft MS Grid. In this, hollow pipes of 3 inches by 1.5 inches were used and the pillars installed were 4 inches square.
Polycarbonate Pergola completed at Kargi Chowk, Dehradun for Mukesh Barthwal Ji. Area 370sqft, Sheet – 2mm Frosted Polycarbonate Sheet. Cost Rs. 275/sqft.
At the front of the Pergola, we cut the pipe into the design to create tails and also installed gutters so that all the water can flow towards the staircase. This pergola cost the client ₹275 per square foot.
We have also provided Khaprail shed at left side balcony of the building. That is 34ft wide with 3.5 ft projection. We used .5mm Khaprail sheet with Gray Stone Finish. Cost of this raincover was ₹ 220 per sqft.
We are still working on the site. Stay connected with us for more such updates. Thank you.
We have installed this tin shed in Mohbewala, Dehradun for retired army personal. In the meeting of half an hour, it was discussed how shed will be installed. The party paid advance same day because the next day was a Saturday. And in Hinduism, iron should not be brought into the house on Saturday. We gave them a 2D drawing in which the concept was clear.
We got the material delivered to the site in which all the material was from APL Apollo 18 Gouge. First of all we made trusses. After that the pillars were erected. 3in by 1.5in pipe was used in truss and 3in square in pillar. We used 1.5in square pipe for the purlins. Then red oxide primer was done on the shade. And later black paint. We did the paint and primer with an electric spray machine which did a beautiful job.
Truss in making
Truss and Main Piller work done
Red oxide completed on strucutre
Paint with Spray Gun in Progress
Sheets being installed
Gutters is being fixed with Perlin
Screwing being done
Front Chazza of Shed
It took us 3 days to do this work. We worked to our satisfaction. Daanbir ji finalized for the red color sheet. We ordered gutter, ridge and tin sheets of red color with .45 mm thickness from Jindal Company. We got the next day material and it took us 1 day to install it. The area of the shed was 900sqft and it cost the party Rs 150 per square feet. We were very happy to work there and the problem (dampness) due to which Daanbir ji got the shed installed got solved.
If you also want fabrication, interior or renovation service in Dehradun, then contact us. We operate from Mandakini Vihar, Sahastradhara. You can also contact us on phone – 7060504666.
Another developer and another great job. This site was in Maldevta, very good work has been done by Tushar ji. He came to the shop with his friends and asked to do a site visit. Everything was finalized within 20 minutes and advance was received. Read the details for complete details about this project.
Welding completed for front side balcony at Maldevta, Dehradun Site.
Backyard Railing is being welded by our fabricator at Maldevta, Dehradun Site.
Staircase Straight Railing completed at Maldevta Site in Dehradun
Design for front side balcony railing of Tushar ji’s site at Maldevta Dehradun
Client Requirement:
1mtr Height Railing in Mild Steel CNC Design
CNC Jali Thickness required 2mm
Different designs for Staircase, front balconies and backside balconies.
Job Processing:
We first took the sizes of railing and told the total budget to the client.
After receiving the advance payment, we ordered the material at our workshop.
All the balcony railings were prepared at the shop itself and then installed at the site.
The first pillars were erected for the railing of the staircase. And framing was done, it was prepared on site.
CNC sheet was installed on the site in the railing of the staircase.
The shed that has been built in Sisauni village has been built at the place of former Pradhan Sandeep Rana ji. He had an open chowk in the house which had to be covered. The area was big and had to be covered on double height. Although we are residents of Saharanpur but still we were contacted through online website.
Pillar, Truss and Purlin view of Tin Shed
Purlin View of Gable Roof Shed
Front Look with Covered Truss of Tin Shed
Fixing Jhallar at Truss of Tin Shed
Green Color Jindal Precoated Sheets
We understood his need and gave him the budget. He has his own brick bhatta, so he has a lot of knowledge about this construction and fabrication field. He has an in-house architect, he finalised the color deed according to Vastu. After the consent of both, the work was started.
Client Demand:
Best quality shed.
20ft Height in Double Slope
Color in Green and Red
Budget Work
Job Processing:
We bought iron from Deoband only. and delivered on site.
Red Oxide was done on the material.
First the truss was prepared, after that the pillars were erected.
Trusses were fixed, all pipe ends were closed.
After that the purlin was welded at a gap of 3ft.
The sheet was purchased from Selaqui, Dehradun only.
In this, the gutter was first installed and then the sheet was held with metal screws.
Ridges were installed at the top.
Proper silicone sealant was applied to the shade.
Shed was ready to serve Pradhan ji.
Material:
18 Gouge APL Apollo Hollow Pipes
3in Square for Pillars
3in by 1.5 for Truss
1.5 in square for Perlin
Primer Asian Red Oxide
Paint Asian Enamel
Sheet .45mm Jindal Latest Profile
Costing:
150 per square feet.
18% GST
Contact for your fabrication, construction and interior work at 7060-504-666 (Sumit Pundir).
When you do some work repeatedly, then expertise comes in it. Now the challenge for us in tin shed work is what to give new. Because we are very happy to put the best tin shed in town. We are doing daily average 250 square feet shed work, we have 2 fabrication teams all are expert in their work. Our shades are better because we work very strong and durable. We completed this shed in just 16 hours and the party loved the work.
Tin Shed Structure is completed with Red Sheet and 2 Triangle Shapes
Tin Shed structure work in progress
Shed Completed at Selaqui in 16 hours
Joint of Tin Shed Dhal from below
Sheet work in progress of Tin Shed in Dehradun
We have used .45mm sheet and all the pipes are of Apollo 18 gauge. Along with that all the accessories like gutter and ridge are used in .45mm. If you also want to do such work, then contact us today. Our workshop is on Sahastradhara Road. Details are below:
Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). We have done a lot of work with the engineers. And every time one gets to learn from them. Joshi ji leave at Prakash Lok Colony near Shimla Bye Pass. They contacted us through our website and was very clear about what they wanted.
Demand of Client:
Joshi ji has given the above portion on rent. They didn’t have tiles on the porch so they wanted to avoid rain water at the same time they needed sunlight. The did not have any budget issue and was aware about the price range.
Area:
Pergola area was 23ft Depth and 26ft Width. It was to be fixed on ground floor roof. In this, we made a grid of 3ft, in which 3in by 1.5in Apollo pipes were used. We have given 6in tails in front to make our design look more beautiful.
Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). Sunil ji took a very quick decision and started the work by giving evening day advance. His test is very good, he was very clear what he want. It took us 5 working days to do this work. Pergola size was 17ft by 11ft. We kept its color white, we applied enamel of white color over it by Asian Paints. We used Apollo 18 gauge pipes and kept some 20 gauge pipes as well. Because costing had to be managed as well as strength. Making more strong than necessary also makes a difference in costing and its waste of money.
The size of the grid we have kept here is 2.5 feet by 2.5 feet. And 3in b 1.5in pipes have been used vertically. In the front of this pergola we have made a 6 inch tail which is giving it more beauty. In this we have used polycarbonate sheet of 2mm. This pergola is a product of the range of Rs.270 per feet.
Structure in progress
Pergola Frame completed
Paint completed at Pergola
Transparent Polycarbonate Sheet Installed
There was one late decision in this work, the pillar you see in some of the images was removed later. Due to this the pergola was
looking grand from below. If you also want to do some such work like fabrication, interior or renovation, then we are providing very good services in Dehradun. We are operating our workshop from Sahastradhara Road, you can also come and meet us and you can also call us at your place.
Call us to schedule a meeting now: +91-7060326021, 7060504666 (Amit Pundir). Office Location - Sahastradhara Rd, Dehradun. Dismiss
