Posted on Leave a comment

Transparent Polycarbonate Pergola on 3rd Floor at Clement Town Dehradun

Complete Installation of Polycarbonate Pergola at 3rd Floor, Clement Town Dehradun for Army Personals. Total Area 600 sqft. Sheet 3mm Transparent Polycarbonate Sheet. Cost Rs. 335/sqft.

Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). We did this project for army personnel, their taste was excellent, we got to learn a lot by working with them. In this we have used rectangular frames. We used Holo Pipes of Apollo Company. In this, we have made a grid of 3ft by 3ft, in which center to center 3ft space has been left.

Framing for Pergola in Dehradun
Framing for Pergola in Dehradun

 

In this pergola, we have painted wooden, in which very fine teak color resha has been added. After primer all the paint work has been done by expert painter. All paint used from from Asian company.

Teak Color Resha or Wooden Texture Paint on Iron Pipes
Teak Color Resha or Wooden Texture Paint on Iron Pipes

 

After that we put 2mm polycarbonate sheet over it. The party wanted a transparent sheet, so it was installed. The sheet was purchased in a roll of 6 feet because the sheet does not stop when the pipe comes in the center. Screws were installed on 1ft gap, and silicone was also used properly, all screws were of Hettich company and silicone was of Astral company.

Transparent Polycarbonate Pergola installed at Clement Town Dehradun
Transparent Polycarbonate Pergola installed at Clement Town Dehradun

 

If you are looking for interior, construction or renovation for your home or office feel free to call us, we are located on Sahastradhara Rd, Dehradun.

Posted on Leave a comment

CNC Jali work at Clement Town Site, Dehradun

Doon Projects – Interior Design and Construction company in Dehradun. We got to do a little CNC, HPL, Polish work near the Graphic Era University in Clement Town for a retired army officer. There was some hpl paneling on front elevation, drawing room ceiling cnc work and mandir arch work In the front elevation, the high-pressured laminate was to be fitted in the front on borders of CNC Jali.

  1. HPL Sheet on Front Elevation with CNC lit Jali in Center part.
    Apollo MS Framing with Red Oxide Treatment
    HPL 6mm Sheet on Outer Sides
    12mm WPC Jali with CNC Router cutting with back milky white acrylic 2mm
    Wipro LED Rope Light

    6mm HPL Sheet on Outer, 12mm WPC in center with 2mm Acrylic and LED Lights
    6mm HPL Sheet on Outer, 12mm WPC in center with 2mm Acrylic and LED Lights
  2. Action TESA MDF CNC Cutting
    Asian Paints Polish on MDF
    Acrylic Sheet on the back of MDF Jalis

    12mm MDF with Polish and 2mm Back Acryclic
    12mm MDF with Polish and 2mm Back Acryclic

    12mm MDF with Polish and 2mm Back Acryclic
    12mm MDF with Polish and 2mm Back Acryclic
  3. Action TESA MDF CNC Arch with Polish
    Wipro LED and 2mm Milky White Acrylic

    12mm MDF with CNC Cut, Acrylic 2mm Sheet on back with Wipro LED Lights
    12mm MDF with CNC Cut, Acrylic 2mm Sheet on back with Wipro LED Lights
Posted on Leave a comment

Designer Steel Railing installed in Ballupur Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun. We have fixed this 4 feet railing at Arpit Jain ji’s place at Ballupur Chowk in Dehradun. The most beautiful thing about the railing is that it has been installed from the front. It is overlapped by 9 inches on the front slab. Primer was already done on it at the workshop and paint is completed after installation.

Its specification is given below.

  • Hollow Pipe – 2in by .5in APL Apollo – 18 Gouge
  • Base Plate – 2mm HR Sheet Prime
  • Paint – Asian Paint Dark Grey Enamel
  • Gap – 3in
  • Height – 4ft
  • Cost – Rs. 300 per square feet
Posted on Leave a comment

Tin Shed at Salan Gaon Masoorie Road, Dehradun

Tin Shed Structure completed at Salan Gaon Site on Mussoorie Road

Doon Projects – Interior Designer and Construction company in Dehradun. People in Dehradun and Mussoorie are super interested in slope roofs, but if the civil work is not done properly, then they also face problems. We often get such clients who have the problem of water coming from the roof, and they want to manage it with tin shed. We have recently done the work of a Professor Madam in Salan village, in which a shed was to be built on her entire roof.

Purlin installed on Tin Shed in Dehradun
Purlin installed on Tin Shed in Dehradun

Project Details:

  • ROOF AREA – 1650 sqft
  • SLOPE – 2 Way Slopes
  • HEIGHT – Clear Height 9ft and Center Height 12ft
  • DIMENSIONS – 25ft by 30ft and 30ft by 30ft
Ridge fixing in progress at Tin Shed Structure at Salan Gaon Site, Mussoorie Road, Dehradun
Ridge fixing in progress at Tin Shed Structure at Salan Gaon Site, Mussoorie Road, Dehradun

The material we used in this was all branded. It took 15 days to do this work. In this, we got the work done from shed to down pipe of plumbing. This entire work was done under the supervision of Amit Pundir ji, and Naushad Bhai, Faisal and Danish were involved in the work. Material details given below:

  • STRUCTURE – APL Apollo Hollow Sections
    PILLERS – 4in Square
    TRUSS – 3in by 1.5in
    PURLIN – 2ft Square
  • SHEET – .45mm JSW Pragati Gray Color
    Warranty – 15 Years, Color Warranty – 7 Years
  • COLOR – Dark Gray Asian Enamel on Hollow Sections
  • DOWNPIPE – 3in Supreme PVC Fittings
Tin Shed Completed with Gutters and Ridges at Salan Gaon, Mussoorie Road, Dehradun
Tin Shed Completed with Gutters and Ridges at Salan Gaon, Mussoorie Road, Dehradun

If you are looking for any type of fabrication, interior and renovation work, give us a call today. Our workshop is on Sahastradhara Road, and we are serving all over Uttarakhand.

Posted on Leave a comment

Her N Sir, Saloon LED Board, Rajpur Road, Dehradun

Duco Painted LED Letter Board designed with louvers background on Rajpur Road, Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun. There are very few people whose thoughts and ideas are similar to yours. And it is also fun to work with them and the product turns out to be awesome. Ravinder Choudhary ji also turned out to be such a client. When we were installing the board of Evergreen Home Company on Canal Road, we met him and he ordered us to repair the board of his saloon.

When we went to see the board, we felt that instead of repairing it, it is better to install a board of new concept, their partners are very smart minded, they understood the concept and we finalized the deal to make some decent board which will give corporate look. We prepared and sent the design of the board as per their demand. We started the work by taking advance payment. The most difficult task in this board was to make its background which was to be made of hollow pipe in louvers look.

Metal LED Box with Duco Paint in Metallic Gray
Metal LED Box with Duco Paint in Metallic Gray

For this, we used a 1 inch square pipe, with a gap of 1 inch. Initially, we were thinking of installing metal sheet at the backside, but to avoid any kind of wiring problem, 6mm fiber sheet was used at the back. After the frame was completed, we painted it twice. For this, we did red oxide first and then enamel paint with the help of spray gun, which gave a great finish. After making the frame, acrylic letters were placed on it, for which we used ACP sheet for raising.

LED Box of Metal MS Sheet with Louvers Background
LED Box of Metal MS Sheet with Louvers Background

In this, the letters that we see on the right hand were also made in a metal box, for that 2mm metal sheet was used. To fix it, 6 clamps were made on it and the board was fixed on the site in 2 pieces. The party liked the board very much, we also felt good after completing it. If you have any new ideas for your front elevation then contact us, we love to create new designs.

 

Posted on Leave a comment

TATA Tin Shed with 4 Slope Gazeebo and Huts in Tapowan, Dehradun

Tata Tin Shed with 4 Slope in Tapowan Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun.

TRUST IS THE BIGGEST RESPONSIBILITY, OUR PRESSURE IS DOUBLE WHEN OUR CLIENTS RELY TOTALLY ON US.

We have made this shed structure at Tapovan Dehradun. The center structure is 32 feet by 30 feet in 4 slopes. And the two side huts are 18 feet wide and 16 feet deep. The big one’s height is 13 feet and the center height of the huts is 10 feet.

The client Mr. Verma has a lot of technical knowledge, he helped a lot in making the structures. We just followed him and achieved it. It took us 20 days to complete this work.

Gazeebo shed structure designed with 2 huts in Dehradun
Gazeebo shed structure designed with 2 huts in Dehradun

Structure is made of APL Apollo hollow sections. In which pillar is 4 inch square, rafter 2 inch square, truss 3 inch by 1.5 inch and perlin is 2 inch square. The structure was painted in light teak color after red oxide treatment. The gutter and top color has been kept white and the sheet color has been graphite grey. The slope of the gutter was placed on the edges, so that the shade looks good even after the down pipe is installed.

The sheet used is of Tata Durashine which comes with 15 years of color warranty and 45 years of sheet warranty. The structure has been made by Atesham – our iron man, the color has been done by Shubham, and this work has been done under the direction of Amit Pundir and Danish Khan. Faisal has installed gutters in the shed. The costing of such a structure comes to Rs. 220 per square feet.

Posted on Leave a comment

Led Board for Evergreen Homz, Harika Ventures Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun. We have made these green colored acrylic letters for a real estate company. We have made their sides with acp so that it can be read easily. Its base is fitted with ivory colored ACP sheet which is Alex brand of Kwality hardware.

This board is 16 feet wide and 2 feet high. Its letter size is 10 inches. And all the other text which is written in black color is directly pasted with acrylic. This company has just taken its office on Canal Road. The client has great taste. He didn’t even have to make much effort to make him like the design.

Although it took time to make the logo and we suggest that the corners of the logo should not be too sharp, there is a problem in fitting the modules. LED modules of Hi-Light company are installed in this board. And whatever acrylic is, that too is full size 3mm of A-Cast company.

If you are also interested in any kind of branding then contact us. We operate our workshop on Sahastradhara Road.

Posted on Leave a comment

Toughened Glass Railing with WPC Partition Sheet

Toughened Glass Railing with WPC Parititon

Doon Projects – Interior Designer and Construction company in Dehradun. This partition is made separately on the railing of steel and glass. It is made of 304 grade steel with a size of 50 mm and a gauge of 18 mm. They wanted a partition on that. The client was very concerned about the quality and finishing. The client is army retired, and has a lot of technical knowledge, he had more experience than us, for this he helped us in making the clamp. The photo of the clamp is given below.

18mm D Bracket and Clamp made by Steel 202 Glass holding bracket
18mm D Bracket and Clamp made by Steel 202 Glass holding bracket

In this we have used fiber mesh of 6.5 density and cutting is also done with 4 mm thick tool so that the finishing is perfect. To stop the sheet in the middle, clamps had to be made whose size was 18 mm. The job was a little late in making it, but in the end we too had a satisfaction. This was about 56 square feet of work, which cost around Rs 500 per square feet.

Job Details:

  • Steel : 18 gouge, 50mm Hollow Section (Brand – Jindal)
  • Sheet: 18mm, 6.5 density (Brand – Black Cobra)
  • Finishing by: Sanjeev Kumar – Sr. Carpenter
  • Project time: 10 Days
Posted on Leave a comment

Bellamount Restaurant and Bar – LED Box Board

Building side led board photo

Doon Projects – Interior Designer and Construction company in Dehradun. We designed the front board for this restaurant last year, the party stopped taking service from us but they called us again because they didn’t like the service of other vendors in Massoorie. Aggarwal ji is a very settled man, he trusted us and got us toughened glass railings, got us made of aluminum windows and also got LED boards on the side.

Board Specifications:

  • Size 20ft by 4ft
  • Structure Material: 1inch Hollow Pipe Framing (Brand APL Apollo) with red oxide coating.
  • ACP Sheet – Alex Brand with Coffee Color exterior grade with 7 years warranty.
  • Cutting with CNC Router with 3mm Tool
  • Acrylic – 3mm White color
  • Lighting – Hi-Light Modules white color
  • Price Rs. 500/sqft
  • Timeline – 07 Working Days
  • Tax and Transportation extra

 

Posted on Leave a comment

Importance of Vastu Shastra in Homes

Doon Projects – Interior Designer and Construction company in Dehradun.

This article features basic facts about Vastu Shastra and its importance. Instead of overloading the readers with too much hard-to-understand information, We have tried to explain it as simply as possible.

Introduction

Vastu Shastra is a term that most of us have come across at some point. But do you know what Vastu Shastra actually mean? Is it some sort of superstition? No, Vastu Shastra is the science of architecture, including texts about the traditional Indian architectural system. It covers a wide range of topics, including design principles, layout, measurements, ground preparation, space arrangement, and spatial geometry. The designs incorporate geometric patterns, symmetry, and alignments according to ancient beliefs to connect architecture with nature. 

Importance of Vastu Shastra in Interiors

To maintain the ecological balance, we must consider specific factors that influence our environment. Likewise, our home is an ecosystem that must be balanced to ensure healthy and prosperous living. Vastu Shastra helps to achieve this goal; let’s see how.

Vastu is based on aligning the home with the five elements of nature, i.e., Earth, water, fire, air, and space, also known as the Panchabhootas in the Vedic traditions. These five essential elements are energetically associated with cardinal directions (North, South, East, and West) and intercardinal directions (North-east, North-west, South-east, and South-west). The Panchabhoota constitute the basis of all life in the universe. All living creatures on this planet derive their existence from them. Balancing these elements in your home can help you maintain good energy and improve functionality for a long time.

Constructing the structure in compliance with Vastu is not enough. Vastu is also essential for the interiors of your home. The placement and arrangement of furniture, decors, accessories, plants, mirrors, wall color, lights, etc., impact the residents. And even if your home isn’t built according to Vastu, various remedies and solutions are available.

Let’s take an example; according to Vastu, mirrors should always be placed on the east and north walls of the house. You must be wondering why? I’ll tell you why; it is simple to understand if we look at it from another perspective. The sun rises in the east, and as the Earth rotates, its positions change, appearing to move towards the south and then west as the day progresses. If you mount the mirror on the east or north wall, you will have the best light throughout the day, and also, if you position it against the light, you may not be able to see your reflection as clearly.

Let’s take another example; according to Vastu, you should not sleep in the north direction. There is a scientific explanation for this too. According to some studies, the magnetic fields on Earth are concentrated at the North and South Poles. When you sleep with your head in the north, your body’s magnetic field interferes with the Earth’s. This can fluctuate your blood pressure and even cause headaches and heart problems.

These examples undoubtedly show that texts written in Vastu Shastra have meaning and are well researched. There is a reason behind every recommendation. If you are unable to follow the principles completely in your home due to certain limitations, following a few essential tips may be helpful.

A Few Vastu Tips for the interior of your home

These tips will help you make your space lively and more functional:

  • The kitchen should have even lighting to avoid shadows as this could be a problem when working. Also, you can install light fixtures on the ceiling and in the storage cabinet if possible.
  • Proper shades on the floor and table lamps are necessary to prevent glare and intense lighting in the room.
  • The main door should always be well lit to avoid tripping hazards and be well-aware, identify and see visitors clearly, especially at night.
  • The home must have plenty of natural light for health and well-being. It is also good for energy conservation.
  • For abundance and maintaining the balance of energy, use indoor plants in your home. They also purify the air.

Conclusion

For health, prosperity, happiness, harmony, and balance, following Vastu in your homes is a must. Vastu Shastra is based on thorough research. It is not just a faith but the science of architecture. Homes designed in compliance with Vastu result in more productivity, increased efficiency, better functionality, and elimination of uncertainties. To design your home according to Vastu, consult an expert. They can also help you find solutions for homes that are not built according to the Vastu.

Why choose Doon Projects?

At Doon Projects Design and Construction, we aim to deliver the highest quality while pursuing the most creative approach. Located in Dehradun, Uttarakhand, we offer exceptional design and construction services. We are known for service excellence and specialize in customized furniture, ceiling, prefabrication, modular kitchens, wall paneling, home automation, front facade design, and Vastu consultancy.

Whether you are planning to build a new house according to Vastu or want to make your existing one Vastu-compliant, we are here to assist you. We are experts at resolving any concerns you might have regarding Vastu Shastra, construction, interior, or exterior design. For more information, you can visit our website doonprojects.com or call us on +91-7060504666.

FAQs

What is the ideal direction of the entrance to the living room?

The entrance to the living room should be in the north or east direction. This will ensure health, wealth, and prosperity.

Where should I place cupboards in my master bedroom?

It would be best to place your cupboards in the southwest corner of your master bedroom.

What should be the position of the cooktop in the kitchen?

The best direction for the cooktop in the kitchen is the southeast; the person should face the east while cooking.

What should be the position of the sink in the kitchen?

The sink and the taps in the kitchen should be placed in the northeast direction.

What should be the position of the WC in the bathroom?

The best position of the WC in the bathroom is west or north-west.

What is a working triangle in the kitchen?

Ergonomics experts devised the kitchen work triangle over a century ago to plan a kitchen layout for maximum efficiency. Vastu also recommends the same. According to Vastu, the stove should be in the southeast, the refrigerator and pantry should be in the southwest, and the sink should be in the northeast.

What is the ideal position of the puja room?

The Puja room should be in the north, east or north-east. You should always face east or north while praying.