Posted on — Leave a comment

Tin Shed in Mohbewala Dehradun for Dhanbeer Singh Ji

We have installed this tin shed in Mohbewala, Dehradun for retired army personal. In the meeting of half an hour, it was discussed how shed will be installed. The party paid advance same day because the next day was a Saturday. And in Hinduism, iron should not be brought into the house on Saturday. We gave them a 2D drawing in which the concept was clear.

We got the material delivered to the site in which all the material was from APL Apollo 18 Gouge. First of all we made trusses. After that the pillars were erected. 3in by 1.5in pipe was used in truss and 3in square in pillar. We used 1.5in square pipe for the purlins. Then red oxide primer was done on the shade. And later black paint. We did the paint and primer with an electric spray machine which did a beautiful job.

It took us 3 days to do this work. We worked to our satisfaction. Daanbir ji finalized for the red color sheet. We ordered gutter, ridge and tin sheets of red color with .45 mm thickness from Jindal Company. We got the next day material and it took us 1 day to install it. The area of ​​the shed was 900sqft and it cost the party Rs 150 per square feet. We were very happy to work there and the problem (dampness) due to which Daanbir ji got the shed installed got solved.

If you also want fabrication, interior or renovation service in Dehradun, then contact us. We operate from Mandakini Vihar, Sahastradhara. You can also contact us on phone – 7060504666.

Thank You!

Posted on — 2 Comments

Bison Board Room Construction in Dehradun for Dr. Kamal Singh

Side Liner Sheet and Top Shed Fixed with Gutters at Prefabricated Room in Dehradun

It feels great to work with a person like the Supreme Being. Dr. Kamal ji, resident of Vishnu Lok has such a good heart and mind, that we may never forget him. Although he had invited us only for the shed of the car, But he also took the costing of the room. There was an area on his first floor which had to be covered. The area to be covered was 15 feet wide and 13 feet long. The meeting was completed in just 1 hour and we started the work next day. Below are the complete details.

Client Requirement:

  • 20ft by 20ft Tin Shed for Car.
  • 15ft by 13ft Room of Bison Board complete with tiles, paint and electric work.

Job Processing:

  • We first dropped the framing material on site.
  • Apollo’s pipes have lube. Before applying anti rust coat on it, it was cleaned with a cloth and Normal Thinner. So that the primer can get hold.
  • Red oxide was done on top of that.
  • The framing for the room was done by our senior fabricator Salman.
  • We used rafters for the roof and square pipes for the side walls.
  • First of all, we put the Liner Sheets on the side which was of white colour.
  • Proper waterproofing was the reason for applying the liner sheet from outside because water damages the Bison (cement-fiber) boards.
  • 6 mm thick bison boards were placed before the tin sheet on the roof.
  • The reason for keeping the bison board was the noise of the rain. It made a difference and it proved effective.
  • Red color sheet of .45mm Jindal company was applied on top of boards.
  • Sheet fixed with Self Drilling Screw. And all accessories like Gutters and top Ridges were fitted.
  • We started the electrical work after fixing the top sheet and outer sheet. In which the wiring was done as per the electrical plan.
  • After completion of electrical work that Bison boards were installed inside (Thickness 10mm).
  • Immediately after that we installed the tiles. In tiles, we used 2sqft tiles for room and 1sqft for terrace.
  • The tiles were set with dust (Poenta Dust) and cement (Ultratech).
  • After that the joint filling work of cement fiber board was done.
  • Putty, primer and paint were done after that. All the paint was Asian Paints and all the putty was JK Interior.
  • The paint job was done in white and all the rafters were kept in gray colour.
  • Finally, the tiles were thoroughly cleaned and grouted with Asian Paints Grout.

Materials:

  • Framing: APL Apollo Hollow Pipes, 2in square for walls, 3in by 1.5in for roof, .75in for bison board ceiling joint covering.
  • Sheets: Top JSW .45mm Pragati Sheet in Red Color, Outer .45mm JSW Liner in White Color, Inside 10mm Bison Panel Cement Fiber.
  • Electric: Havells HRFR Wires 1mm and 1.5mm, Polycab Pipes, Anchor Penta Switches, USHA Fans.
  • Tiles: Vitrified Tiles for interior in matt finish, Porch tiles 1ft by 1ft. Tile Grout Asian Paints.
  • Paint: Putty JK Interior, Paint Asian Paints Emulsion Shyne.

Costing:

  • Rs. 150/sqft Tin Shed
  • Rs. 60/sqft for Ceiling Bison Boards 6mm
  • Rs. 220/sqft for walls outer liner and interior bison board
  • Rs. 30/sqft for paint work
  • Rs. 150/sqft for Tiles in room and hall

If you want our Construction, Interior, Fabrication or Renovation service in Dehradun or nearby cities then you can contact us at 7060504666 (Sumit Pundir).

Thanks for your time!!!

Posted on — Leave a comment

CNC Railing Installed at Tushar Ji’s House at Maldevta Dehradun

Another developer and another great job. This site was in Maldevta, very good work has been done by Tushar ji. He came to the shop with his friends and asked to do a site visit. Everything was finalized within 20 minutes and advance was received. Read the details for complete details about this project.

Client Requirement:

  • 1mtr Height Railing in Mild Steel CNC Design
  • CNC Jali Thickness required 2mm
  • Different designs for Staircase, front balconies and backside balconies.

Job Processing:

  • We first took the sizes of railing and told the total budget to the client.
  • After receiving the advance payment, we ordered the material at our workshop.
  • All the balcony railings were prepared at the shop itself and then installed at the site.
  • The first pillars were erected for the railing of the staircase. And framing was done, it was prepared on site.
  • CNC sheet was installed on the site in the railing of the staircase.
  • Finishing of railing was done by grinder.

Materials:

  • All 18 gauge Apollo pipes were used.
  • CNC Jali made of 2mm mild steel TATA HR Prime Material.
  • The tops of the pillars were made of Action TESA HDHMR Boards.

Costings:

  • Staircase Railing @ Rs. 1,250/running feet.
  • Balcony Railing @ Rs. 1,050/running feet.

If you want our Construction, Interior, Fabrication or Renovation service in Dehradun or nearby cities then you can contact us at 7060504666.

Thanks for your time!!!

Posted on — Leave a comment

Tin Shed Insalled in Sisauni, Deoband, Saharanpur

The shed that has been built in Sisauni village has been built at the place of former Pradhan Sandeep Rana ji. He had an open chowk in the house which had to be covered. The area was big and had to be covered on double height. Although we are residents of Saharanpur but still we were contacted through online website.

We understood his need and gave him the budget. He has his own brick bhatta, so he has a lot of knowledge about this construction and fabrication field. He has an in-house architect, he finalised the color deed according to Vastu. After the consent of both, the work was started.

Client Demand:

  • Best quality shed.
  • 20ft Height in Double Slope
  • Color in Green and Red
  • Budget Work

Job Processing:

  • We bought iron from Deoband only. and delivered on site.
  • Red Oxide was done on the material.
  • First the truss was prepared, after that the pillars were erected.
  • Trusses were fixed, all pipe ends were closed.
  • After that the purlin was welded at a gap of 3ft.
  • The sheet was purchased from Selaqui, Dehradun only.
  • In this, the gutter was first installed and then the sheet was held with metal screws.
  • Ridges were installed at the top.
  • Proper silicone sealant was applied to the shade.
  • Shed was ready to serve Pradhan ji.

Material:

  • 18 Gouge APL Apollo Hollow Pipes
  • 3in Square for Pillars
  • 3in by 1.5 for Truss
  • 1.5 in square for Perlin
  • Primer Asian Red Oxide
  • Paint Asian Enamel
  • Sheet .45mm Jindal Latest Profile

Costing:

  • 150 per square feet.
  • 18% GST

Contact for your fabrication, construction and interior work at 7060-504-666 (Sumit Pundir).