Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).18mm HDMR Action Brand used with .8 SF 8088 Mica. Arch with 18mm WPC cutted with CNC Router Prince Brand. Base Sheed Om Design with Acrylic Milky White A-Cast Brand of 3mm. LED Used Phillips Brand Strip light with Original Adaptor.
7feet Height and 38 Inches Width Door made with 2 MDF Sheets 18mm+12mm Action Brand cutting done with Prince Brand Woodworking CNC Machine. Section above Door is made with ACP Partition Sheet 4mm of Alex Brand, vinyl sticker pasted on front side.
This design has been made for a special person who increased our budget after seeing our work and gave us an opportunity to build a temple in his house. This temple looks common, but you will understand its beauty when standing in front of it. It is made with the best material, even its finishing is very amazing. The entire 10 feet height has been designed. At first we had made a smaller plan than this.
But Shailesh ji asked us to make a slight change in the design which made its beauty even better. It has been made in just 3 days. It cost Rs 45,000 and we have built this temple for Rs 60,000. Only 15,000 labor and design have been spent in it.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll
By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.
It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1.2 lakh rupees. In this, everything done from Duco paint is done in almost the entire house. Marble cost extra paid by the customer, marble was costing Rs. 60,000/- for this mandir design.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
Om Design CNC – 8mm painted with Normal Golden Color
Om Namay Shivay written with 3mm Acrylic – Red
Duco Painted 12mm WPC Sheet Partition
Fitted with MS Pipe 1×1 inch with White Paint.
8mm MDF Painted with normal dark blue paint
This work has been done for a very good architect who has just completed his studies, he has recently built a house in Dharampur, the whole house has been built by mixing modern and traditional themes. However the house looks very cute. In this, he made a small budget and the finishing came out fantastic.
It has a Green company MDF board which is 8mm, we had a lot of trouble in doing this work, if the board was 12mm then it was better. After that whatever the design was, it was Sharaddha ji who did the final after that, after harvesting, we had the goods reached his house. Then he painted his own painters with his painters and called us to fix them. The smile was the most difficult in this, and had to work hard to match it.
He had to apply Asian paint with white silicon, which was not a permanent solution. Bidding is the best option for him, but nowadays a sheet is being installed in this way only, so we also put it like this. After that, the sheet behind the temple is an acrylic sheet of white color A-Cast company which is 2mm thick. The kitchen partition that has been forged in it is a 12mm sheet of the Black Cobra Company on which they have painted. All the sheets are fixed with steel screws.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). There are very few clients from whom we get to learn the opposite. Duco Paint Finish, CNC Jali, Acrylic Golden Letter, ACP Sheet, Cabinet and what didn’t we do to build this temple. This work has been done on Canal Road which is a road adjoining Rajpur Road. We got this project online, the client had no budget problem, he just wanted good work.
Whatever material was used in it belonged to the Action Company and Paint of Asian Company. Whatever light work was done, it’s brand is Samsung. The most attractive thing in this is the door and the bells hanging on it. Its door is made of MDF Material, we made two 30mm thickness by pasting two boards together and then processed in CNC Cutting machine.
30 mm CNC MDF Door with Natural Wood Polish designed for Canal Road site in Dehradun.
After that we designed Krishna with the help of CNC machine on 8mm MDF sheet which is easily available even on the internet. Then painted it well in white. After that we put a gap of 2 Inch and put LED Strip on the side with the help of Sunboard. Then attached the design to the wall with the help of Star screw so that it can be easily removed and applied in future also.
8mm MDF with Duco Paint Finish and Samsung LED Strip designed for Canal Road based Villa in Dehradun.
Along with this, we also put Gayatri Mantra of Golden color on the side wall. It was mounted on Alex Sheet with the help of special screw which you can see in the photo. Everyone liked this work very much, it cost about 50 thousand. If you also want to do something similar in your home or office, then you can meet us at our workshop on Sahastradhara Road.
Designed Gayatri Mantra wall for Canal Road based Site in Dehradun.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services.
Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Call us to schedule a meeting now: +91-7060326021, 7060504666 (Amit Pundir). Office Location - Sahastradhara Rd, Dehradun. Dismiss
