Posted on Leave a comment

Antique Furniture work with Solidwood for Mr. Arun Bhalla Ji in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

We will remember this work throughout our life. There are very few clients who can spend freely. And with that, they have a good idea of ​​where to spend. With Varun ji, we did not have to do much brainstorming. The most difficult was to catch their taste and live up to their expectation. By doing this work, our level only increased.

Kids Room Wooden Furniture Design
We designed this special Hut shaped Wardrobe with Study Table. All Laminate is 1mm Gloss with Complete Wooden Framing

 

Low Height Bed with Complete Wooden Backdrop and Melamine Polish
Low Height Wooden Bed with Polished Wall Paneling upto Ceiling Height

 

Ireland Counter Top with PU Paint Finish
Complete Kitchen with Hafele and Hettich Fittings. Base Material Solid Wood Frame & 710 Grade Waterproof Ply.

 

Complete Modular Kitchen with Hettich, Hafele and Peacock Fittings
Kitchen is the fantastic part of their home, This is our first Ireland Countertop we designed in this Villa, All fittings of Hafele and Hettich Brand with Peacock Hinges and all fitting is soft close.

 

Solid Wood Stair Design
We have provided precious Jeena Design in Solid wood with Polish

 

Every corner of this house has been specially designed, and most of the jungle wood has been used. The ceiling has pine sealing with polish.

 

Low Height 9 Seater Sofa Designed in Dehradun
Low Height 9 Seater Sofa Designed in Dehradun

 

We have done this work with full vigor and we are proud of this work. If you also want to do some work by joining us and want our service, then call us today.

Posted on Leave a comment

Pooja Room Interior Designer work in Magnolia Villa Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). This time again worked with the engineer and the experience remained the same. Her only demand was that she wanted the Om in orange color. And there wanted push technology drawers as you can see in the video.

They also wanted the cost of the temple in the budget, but their selection was best. He was our old client, so we started working in No Profit No Loss.

The best quality material was put in it. Action company HDHMR, WPC of Cobra company and Lights of Havells. You can see the partition on the side, how cute looks are coming. In this, Arch is also specially designed, which is done in 12 mm WPC.

In this, 18 inch channers have been used. After this you can see that the design is given well. The work of CNC machine has also been excellent. If you also want service of interior or architecture in Dehradun then you can call us. Our office is on Sahastradhara Road and we also do construction. For our ongoing project, you can see it on the going page on our website.

Posted on Leave a comment

Lighted Wall Mounted Tree Art for Home Decoration in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

Lighted Wall Mounted Tree Art for Home Decoration in Dehradun
Lighted Wall Mounted Tree Art for Home Decoration in Dehradun @ Rs. 35,000/-

 

We made this tree for Manish ji, who lives on Shimla bye pass road. He finalized the order in one meeting, his mind was clear about what and how to be made. There was to be a store area in a kitchen, followed by a temple which was of his mother’s choice and together with a TV cabinet storage, these were a total of 4 items.  Below you can see that we made all the things together in our workshop and the finish is the same in all.

12mm MDF designed with CNC Router
Matte Polish First Coat

 

Kitchen Storage area made racks with Plyboard and Laminates @ Rs. 28,000/-
Kitchen Storage area made racks with Plyboard and Laminates @ Rs. 28,000/-
18mm Plyboard with Normal Laminate Finish @ Rs. 12,000/-
12mm WPC Om Design on Wall Mounted Frame of Plyboard 18mm with Normal Mica Finish @ Rs. 10,000/-

Ply board and normal mica finish were used in all these items. MDF was used only in the tree, which belongs to the Action company. In this, Polish work was done by a very senior professional after which it was stopped on the wall with steel leaves.  The LED light was fitted with Philips and whatever board was used was from Green Company.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on Leave a comment

Wedding Polaroid Studio Interior in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). We love working with creative people. We did this project with some camera artists from Dehradun who took office recently on Canal Road. Deadline was very small in this. The entire decoration was to be done in a total of 10 days, in which the pinewood furniture above the ceiling and many other things had to be done.

We worked day and night and ended it within the timeline, even the work was done within the budget and the party liked it very much. We enjoyed working ourselves because some creative furniture was to be made in which MS has also been used, you can see in the photo.

If you also want to design your office or showroom then call us today. We have the most skilled labor in the city.

Posted on Leave a comment

UV and PVC Sheet Interior Design in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). Work done in association of Shanaya Decor – Rishikesh (Mr. Lalit Bitta). All material installed with highly skilled labour and all fittings and material is branded.

Delby Company PVC Wall Paneling done with Ganesh Ji UV Sheet Cut-out installed with Samsung LED Strip in Rishikesh
CNC Design on UV Sheet with LED Strip and Acrylic Sheet inside.
CNC False Ceiling Design on UV Sheet 4mm with Multicolor LED Strip and PVC Material also used for sides.
Posted on

CNC Carving, LED Name Plate and LED Sign Board works

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
4x4 Portrait Engraving
We engraved 18mm MDF Board and finished it with Teakwood matte Finish for this Painting. Frame is in Pinewood with same rough polish. Portrait is designed by senior artist after that we used Artcam Software to Engrave the designs in MDF by Prince CNC Router. We also providing Corian Stone Engraving and 3D Cutting Service in Dehradun.
Backfire Sign Board for Restaurant in Dehradun
Made and installed backfire antique sign on GMS Road, Dehradun. Front Sheet ACP Alex Brand, Side with 3mm Acrylic A-Cast Brand and Modules used Samsung, Letters raising 2″. Based Alex wooden sheet.
Navy Captain Name Plate in Dehradun
Designed and installed name plate in Dehradun by using 6mm A-Cast Acrylic Black, Letters with 3mm Golden Mirror Acrylic.
Posted on

Front Facade of Villa Designed in Vishwanath Envclave – Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
Side Jali Size: 6ft width and 7ft Height. Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain
Jali Size: 4×4 – 3 Blocks Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain
Door Size: 7.5ft by 38inches Material: Choukhat Saal 6″x3″ Board – Action TESA 18mm Plyboard Duco Finish Paint on CNC Gloss Polish on Other Part
Leaf CNC Design in Zigzag Shape Material: Wooden Frame 6″x3″ WPC 18mm Black Cobra HD Frame 1″ Apollo Pipe

We always feel good working with engineers, it adds more to our work. The same happened in this work, in this we have used good material, but made a better design than that. It was tough job that the window sizes were not standard. So there was sheet wastage, we had to work with the joints. We managed the joints very well, you may see in the images.

Villa Facade designed in Dehradun for Mr. Rupam Bhatia Dehradun

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

Pooja Room Designed in Mandakini Vihar Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
HDMR Pooja Room in Dehradun
18mm HDMR Action Brand used with .8 SF 8088 Mica. Arch with 18mm WPC cutted with CNC Router Prince Brand. Base Sheed Om Design with Acrylic Milky White A-Cast Brand of 3mm. LED Used Phillips Brand Strip light with Original Adaptor.
Ganesh Ji CNC Door with MDF
7feet Height and 38 Inches Width Door made with 2 MDF Sheets 18mm+12mm Action Brand cutting done with Prince Brand Woodworking CNC Machine. Section above Door is made with ACP Partition Sheet 4mm of Alex Brand, vinyl sticker pasted on front side.

This design has been made for a special person who increased our budget after seeing our work and gave us an opportunity to build a temple in his house. This temple looks common, but you will understand its beauty when standing in front of it. It is made with the best material, even its finishing is very amazing. The entire 10 feet height has been designed. At first we had made a smaller plan than this.

But Shailesh ji asked us to make a slight change in the design which made its beauty even better. It has been made in just 3 days. It cost Rs 45,000 and we have built this temple for Rs 60,000. Only 15,000 labor and design have been spent in it.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

Pooja Room Designed with Marble and CNC in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
Italian Marble Pooja Room Interior
This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.
Ganesh Murti Copper with Italian Marble Backdrop
Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.
CNC Mandir Gate 30mm
Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.
Side Wall with 18mm WPC Jali
Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll

By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.

It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1.2 lakh rupees. In this, everything done from Duco paint is done in almost the entire house. Marble cost extra paid by the customer, marble was costing Rs. 60,000/- for this mandir design.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on

Name Plate, LED Sign Board and UV Marble CNC Cutting works

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

Golden Acrylic Name Plate for Raiwala Site Dehradun
Black and Golden 3mm Acrylic Name plate made for Dehradun based client. Size is 14inch x 14inch.

Vinyl Sticker Dehradun
Designed for IT Park Located Cook House in Dehradun. Normal Vinyl printed with HP Printer, Pasting is also done by our team.

WPC Mandir CNC Design Dehradun
Complete mandir design with CNC Router and fixed with Bond. Sheet used 12mm WPC of HD Quality.

LED Board City Smiles Dental Clinic Dehradun
12×3 sqft LED Board. All material is Alex and Acrylic, fixing is also done by our team. Very good client experience.

UV Sheet Cutting Ganesh Ji CNC Dehradun
Special Marble look UV Sheet 3mm with Acrylic base. All cutting done by router CNC Machine.

UV Sheet Marble CNC Cutting Dehradun
Different stone shade of UV Sheet. Sheet is available in 8x4sqft size. Sheet require base to be fixed.