Trends – Page 9 – Doon Projects

Posted on December 1, 2020February 14, 2023 by Sumit — Leave a comment

Lighted Wall Mounted Tree Art for Home Decoration in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

We made this tree for Manish ji, who lives on Shimla bye pass road. He finalized the order in one meeting, his mind was clear about what and how to be made. There was to be a store area in a kitchen, followed by a temple which was of his mother’s choice and together with a TV cabinet storage, these were a total of 4 items. Below you can see that we made all the things together in our workshop and the finish is the same in all.

Kitchen Storage area made racks with Plyboard and Laminates @ Rs. 28,000/-

18mm Plyboard with Normal Laminate Finish @ Rs. 12,000/-

12mm WPC Om Design on Wall Mounted Frame of Plyboard 18mm with Normal Mica Finish @ Rs. 10,000/-

Ply board and normal mica finish were used in all these items. MDF was used only in the tree, which belongs to the Action company. In this, Polish work was done by a very senior professional after which it was stopped on the wall with steel leaves. The LED light was fitted with Philips and whatever board was used was from Green Company.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

Posted on November 25, 2020February 14, 2023 by Sumit — Leave a comment

Avinash Kumar House Construction Starts in Selaqui – Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

Full house construction on Labour Rate in Dehradun

Posted on November 16, 2020February 14, 2023 by Sumit — Leave a comment

Wedding Polaroid Studio Interior in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). We love working with creative people. We did this project with some camera artists from Dehradun who took office recently on Canal Road. Deadline was very small in this. The entire decoration was to be done in a total of 10 days, in which the pinewood furniture above the ceiling and many other things had to be done.

We worked day and night and ended it within the timeline, even the work was done within the budget and the party liked it very much. We enjoyed working ourselves because some creative furniture was to be made in which MS has also been used, you can see in the photo.

If you also want to design your office or showroom then call us today. We have the most skilled labor in the city.

Posted on November 16, 2020February 14, 2023 by Sumit — Leave a comment

UV and PVC Sheet Interior Design in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). Work done in association of Shanaya Decor – Rishikesh (Mr. Lalit Bitta). All material installed with highly skilled labour and all fittings and material is branded.

Delby Company PVC Wall Paneling done with Ganesh Ji UV Sheet Cut-out installed with Samsung LED Strip in Rishikesh

CNC Design on UV Sheet with LED Strip and Acrylic Sheet inside.

CNC False Ceiling Design on UV Sheet 4mm with Multicolor LED Strip and PVC Material also used for sides.

Posted on November 4, 2020February 14, 2023 by Sumit

CNC Carving, LED Name Plate and LED Sign Board works

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

4x4 Portrait Engraving — We engraved 18mm MDF Board and finished it with Teakwood matte Finish for this Painting. Frame is in Pinewood with same rough polish. Portrait is designed by senior artist after that we used Artcam Software to Engrave the designs in MDF by Prince CNC Router. We also providing Corian Stone Engraving and 3D Cutting Service in Dehradun.

Backfire Sign Board for Restaurant in Dehradun — Made and installed backfire antique sign on GMS Road, Dehradun. Front Sheet ACP Alex Brand, Side with 3mm Acrylic A-Cast Brand and Modules used Samsung, Letters raising 2″. Based Alex wooden sheet.

Navy Captain Name Plate in Dehradun — Designed and installed name plate in Dehradun by using 6mm A-Cast Acrylic Black, Letters with 3mm Golden Mirror Acrylic.

Posted on November 3, 2020February 14, 2023 by Sumit

Front Facade of Villa Designed in Vishwanath Envclave – Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

Side Jali Size: 6ft width and 7ft Height. Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain

Jali Size: 4×4 – 3 Blocks Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain

Door Size: 7.5ft by 38inches Material: Choukhat Saal 6″x3″ Board – Action TESA 18mm Plyboard Duco Finish Paint on CNC Gloss Polish on Other Part

Leaf CNC Design in Zigzag Shape Material: Wooden Frame 6″x3″ WPC 18mm Black Cobra HD Frame 1″ Apollo Pipe

We always feel good working with engineers, it adds more to our work. The same happened in this work, in this we have used good material, but made a better design than that. It was tough job that the window sizes were not standard. So there was sheet wastage, we had to work with the joints. We managed the joints very well, you may see in the images.

Villa Facade designed in Dehradun for Mr. Rupam Bhatia Dehradun

Posted on October 24, 2020February 14, 2023 by Sumit

Pooja Room Designed in Mandakini Vihar Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

HDMR Pooja Room in Dehradun — 18mm HDMR Action Brand used with .8 SF 8088 Mica. Arch with 18mm WPC cutted with CNC Router Prince Brand. Base Sheed Om Design with Acrylic Milky White A-Cast Brand of 3mm. LED Used Phillips Brand Strip light with Original Adaptor.

Ganesh Ji CNC Door with MDF — 7feet Height and 38 Inches Width Door made with 2 MDF Sheets 18mm+12mm Action Brand cutting done with Prince Brand Woodworking CNC Machine. Section above Door is made with ACP Partition Sheet 4mm of Alex Brand, vinyl sticker pasted on front side.

This design has been made for a special person who increased our budget after seeing our work and gave us an opportunity to build a temple in his house. This temple looks common, but you will understand its beauty when standing in front of it. It is made with the best material, even its finishing is very amazing. The entire 10 feet height has been designed. At first we had made a smaller plan than this.

But Shailesh ji asked us to make a slight change in the design which made its beauty even better. It has been made in just 3 days. It cost Rs 45,000 and we have built this temple for Rs 60,000. Only 15,000 labor and design have been spent in it.

Posted on October 23, 2020February 14, 2023 by Sumit

Pooja Room Designed with Marble and CNC in Dehradun

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

Italian Marble Pooja Room Interior — This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.

Ganesh Murti Copper with Italian Marble Backdrop — Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.

CNC Mandir Gate 30mm — Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.

Side Wall with 18mm WPC Jali — Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll

By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.

It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1.2 lakh rupees. In this, everything done from Duco paint is done in almost the entire house. Marble cost extra paid by the customer, marble was costing Rs. 60,000/- for this mandir design.

Posted on September 13, 2020February 14, 2023 by Sumit

Name Plate, LED Sign Board and UV Marble CNC Cutting works

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).

Golden Acrylic Name Plate for Raiwala Site Dehradun — Black and Golden 3mm Acrylic Name plate made for Dehradun based client. Size is 14inch x 14inch.

Vinyl Sticker Dehradun — Designed for IT Park Located Cook House in Dehradun. Normal Vinyl printed with HP Printer, Pasting is also done by our team.

WPC Mandir CNC Design Dehradun — Complete mandir design with CNC Router and fixed with Bond. Sheet used 12mm WPC of HD Quality.

LED Board City Smiles Dental Clinic Dehradun — 12×3 sqft LED Board. All material is Alex and Acrylic, fixing is also done by our team. Very good client experience.

UV Sheet Cutting Ganesh Ji CNC Dehradun — Special Marble look UV Sheet 3mm with Acrylic base. All cutting done by router CNC Machine.

UV Sheet Marble CNC Cutting Dehradun — Different stone shade of UV Sheet. Sheet is available in 8x4sqft size. Sheet require base to be fixed.

Posted on August 20, 2020February 14, 2023 by Sumit

Best 3D Max Designer Dehradun +919997833350

Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). This is Sumit Pundir, 3D Max Artist in Dehradun. My location is Sahastradhara Road, Dehradun. I have completed more than 12 Residential and Commercial Projects and worked with several good interior designers of Dehradun like Naithani Ji, Fine Interior etc. If you have any project to work on and want to show your client the 3D House Tour or Project tour you may contact me at above given number. Some of my drawings shown here but I can not showcase my all work in this portfolio because I don’t have rights of this.

Square size table designed for Residential Project.

Sofa Set and CNC Wall Panel Designed for Dehradun based client.

Kids bed design for Dehradun based client

3D Renders by for Construction & Interiors — 3D Renders for Construction & Interiors

Room and Office designed with a Partition.

This is Clinic Layout designed for Dehradun based client – Size 23x9ft. Aluminium with 8mm Glass and Tuffon glass will be used for front. All furniture finish is natural wood.

If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.