Posted on — Leave a comment

Transparent Polycarbonate Pergola on 3rd Floor at Clement Town Dehradun

Complete Installation of Polycarbonate Pergola at 3rd Floor, Clement Town Dehradun for Army Personals. Total Area 600 sqft. Sheet 3mm Transparent Polycarbonate Sheet. Cost Rs. 335/sqft.

Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). We did this project for army personnel, their taste was excellent, we got to learn a lot by working with them. In this we have used rectangular frames. We used Holo Pipes of Apollo Company. In this, we have made a grid of 3ft by 3ft, in which center to center 3ft space has been left.

Framing for Pergola in Dehradun
Framing for Pergola in Dehradun

 

In this pergola, we have painted wooden, in which very fine teak color resha has been added. After primer all the paint work has been done by expert painter. All paint used from from Asian company.

Teak Color Resha or Wooden Texture Paint on Iron Pipes
Teak Color Resha or Wooden Texture Paint on Iron Pipes

 

After that we put 2mm polycarbonate sheet over it. The party wanted a transparent sheet, so it was installed. The sheet was purchased in a roll of 6 feet because the sheet does not stop when the pipe comes in the center. Screws were installed on 1ft gap, and silicone was also used properly, all screws were of Hettich company and silicone was of Astral company.

Transparent Polycarbonate Pergola installed at Clement Town Dehradun
Transparent Polycarbonate Pergola installed at Clement Town Dehradun

 

If you are looking for interior, construction or renovation for your home or office feel free to call us, we are located on Sahastradhara Rd, Dehradun.

Posted on — Leave a comment

CNC Jali work at Clement Town Site, Dehradun

Doon Projects – Interior Design and Construction company in Dehradun. We got to do a little CNC, HPL, Polish work near the Graphic Era University in Clement Town for a retired army officer. There was some hpl paneling on front elevation, drawing room ceiling cnc work and mandir arch work In the front elevation, the high-pressured laminate was to be fitted in the front on borders of CNC Jali.

  1. HPL Sheet on Front Elevation with CNC lit Jali in Center part.
    Apollo MS Framing with Red Oxide Treatment
    HPL 6mm Sheet on Outer Sides
    12mm WPC Jali with CNC Router cutting with back milky white acrylic 2mm
    Wipro LED Rope Light

    6mm HPL Sheet on Outer, 12mm WPC in center with 2mm Acrylic and LED Lights
    6mm HPL Sheet on Outer, 12mm WPC in center with 2mm Acrylic and LED Lights
  2. Action TESA MDF CNC Cutting
    Asian Paints Polish on MDF
    Acrylic Sheet on the back of MDF Jalis

    12mm MDF with Polish and 2mm Back Acryclic
    12mm MDF with Polish and 2mm Back Acryclic

    12mm MDF with Polish and 2mm Back Acryclic
    12mm MDF with Polish and 2mm Back Acryclic
  3. Action TESA MDF CNC Arch with Polish
    Wipro LED and 2mm Milky White Acrylic

    12mm MDF with CNC Cut, Acrylic 2mm Sheet on back with Wipro LED Lights
    12mm MDF with CNC Cut, Acrylic 2mm Sheet on back with Wipro LED Lights