Posted on — Leave a comment

Hotel Amit LED Board in Rudraprayag

In Rudraprayag, we have recently set up a site in which the party had already done the app paneling. In this, white colored lead letters were to be placed on top of the red color app sheet. We installed this site ourselves, the way to reach Rudraprayag is amazing. After the site was installed, it looked great, you can see in the images that we have written the name of the hotel in a slightly different typography.

There was a slight problem in setting up the site, the party had asked for proper padding, but we only got a ladder there, due to which the alignment of the letters got a bit messed up. If you want to do any installation or branding, please clear beforehand what can be found on your site and what is not.

Posted on — Leave a comment

Mandir Arch and Chowki at Panache Valley, Sahastradhara Rd, Dehradun

Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). Recently, our special property dealer Kamal Saini ji gave us the reference of a client in Dehradun. Client is doing job in Dubai and his house is on Sahastradhara Road at Panache Valley Society. He had given the temple at the entry itself, in which he had to install a nice backdrop and a door. We understood their taste and can see in the image below, we have made a complete arch in which 1ft space has been covered from both the sides.

Pooja Mandir Backdrop, Chowki and Arch CNC Jali Designed by Best Interior Designer and Construction Company in Dehradun
Pooja Mandir Backdrop, Chowki and Arch CNC Jali Designed by Best Interior Designer and Construction Company in Dehradun

 

Chowki Details: In this, we have made a post of 18 inches, on which Century’s 1mm laminate has been applied. Apart from that, the white laminate is of advanced .8mm high gloss. It has a high gloss brown finish on top with a wooden texture. The two drawers are 18in deep with front knob handles of premium quality.

Backdrop Details: In this we have done off white duco color on top of 12mm WPC sheet. The depth of the box is 3 inches, inside which there is a warm white color LED Strip Light of the Wipro company. Its size is 3ft square.

CNC Jali Entry: 18mm MDF Board with CNC Cutting has been used for jali. Polish has been done by our expert carpenter. All polish material is of Asian Company. We have put molding on the sides for strength.

Kindly check the video for details.

 

Posted on — Leave a comment

Transparent Polycarbonate Pergola on 3rd Floor at Clement Town Dehradun

Complete Installation of Polycarbonate Pergola at 3rd Floor, Clement Town Dehradun for Army Personals. Total Area 600 sqft. Sheet 3mm Transparent Polycarbonate Sheet. Cost Rs. 335/sqft.

Doon Projects – Interior Designer and Construction Company in Dehradun (Sumit Pundir – 9997833350). We did this project for army personnel, their taste was excellent, we got to learn a lot by working with them. In this we have used rectangular frames. We used Holo Pipes of Apollo Company. In this, we have made a grid of 3ft by 3ft, in which center to center 3ft space has been left.

Framing for Pergola in Dehradun
Framing for Pergola in Dehradun

 

In this pergola, we have painted wooden, in which very fine teak color resha has been added. After primer all the paint work has been done by expert painter. All paint used from from Asian company.

Teak Color Resha or Wooden Texture Paint on Iron Pipes
Teak Color Resha or Wooden Texture Paint on Iron Pipes

 

After that we put 2mm polycarbonate sheet over it. The party wanted a transparent sheet, so it was installed. The sheet was purchased in a roll of 6 feet because the sheet does not stop when the pipe comes in the center. Screws were installed on 1ft gap, and silicone was also used properly, all screws were of Hettich company and silicone was of Astral company.

Transparent Polycarbonate Pergola installed at Clement Town Dehradun
Transparent Polycarbonate Pergola installed at Clement Town Dehradun

 

If you are looking for interior, construction or renovation for your home or office feel free to call us, we are located on Sahastradhara Rd, Dehradun.

Posted on — Leave a comment

CNC Jali work at Clement Town Site, Dehradun

Doon Projects – Interior Design and Construction company in Dehradun. We got to do a little CNC, HPL, Polish work near the Graphic Era University in Clement Town for a retired army officer. There was some hpl paneling on front elevation, drawing room ceiling cnc work and mandir arch work In the front elevation, the high-pressured laminate was to be fitted in the front on borders of CNC Jali.

  1. HPL Sheet on Front Elevation with CNC lit Jali in Center part.
    Apollo MS Framing with Red Oxide Treatment
    HPL 6mm Sheet on Outer Sides
    12mm WPC Jali with CNC Router cutting with back milky white acrylic 2mm
    Wipro LED Rope Light

    6mm HPL Sheet on Outer, 12mm WPC in center with 2mm Acrylic and LED Lights
    6mm HPL Sheet on Outer, 12mm WPC in center with 2mm Acrylic and LED Lights
  2. Action TESA MDF CNC Cutting
    Asian Paints Polish on MDF
    Acrylic Sheet on the back of MDF Jalis

    12mm MDF with Polish and 2mm Back Acryclic
    12mm MDF with Polish and 2mm Back Acryclic

    12mm MDF with Polish and 2mm Back Acryclic
    12mm MDF with Polish and 2mm Back Acryclic
  3. Action TESA MDF CNC Arch with Polish
    Wipro LED and 2mm Milky White Acrylic

    12mm MDF with CNC Cut, Acrylic 2mm Sheet on back with Wipro LED Lights
    12mm MDF with CNC Cut, Acrylic 2mm Sheet on back with Wipro LED Lights