Tag: tin shed dehradun

Posted on by — Leave a comment

5000sqft Tin Shed for SK Oilfeild, Rajpur Rd, Dehradun

Tin Shed SK OilField Dehradun

STEP 01: MEETING & DESIGN:

There was a lot of pomp in the house. There were a lot of ups and downs in the roof, so deciding what to design the shed took a lot of time. Amit ji was the representative there, he was clear that the water should not come from anywhere and should look good. We gave 2 options for the tin shed design out of which one was finalized.

Step 02: STRUCTURE DESIGN

After advance payment and agreement, we started the work of the structure which was fixed by cutting grouting of all the plates. All the material was dropped on the site of Tata 18 Gauge and red oxide was applied on it. Our experienced craftsmen designed a very strong and beautiful structure which we enameled in Silver Grey colour as it matches the colour of the sheets from below. The structure took us 20 days to complete, with the shed being built in 2-3 layers. We then ordered the sheets while the paint work was still going on at the site.

Step 03: SHEET & ACCESSORIES FIXING

First of all we installed rain gutters, which were 5in size, the colour of all the sheets and accessories was kept red. After that we started installing the sheets, the air pressure was very high so the screws were used a little more than normal. We removed the guard film from the sheet and then installed the ridge on top. This work also took four days. The team really liked the work, and we are very happy about it.

Step 04: Downpipes

The look of the shed would be of no use if some amateur plumber had installed the downpipes incorrectly. We got the plumbing work done ourselves and charged extra for it, but it was a very perfect job, costing around Rs 180 per foot. The pipe used was Tata and sheet 0.45mm Jindal.

We are working from Dehradun Sahastradahara Road, if you need any service from building a house to its maintenance then you can contact us.

Posted on by — Leave a comment

TATA Durashine Tin Shed Roofing at Indira Nagar Dehradun

Doon Projects provides home construction, interior and renovation services in Uttarakhand. We have done shed roofing work in an area of ​​2800 sqft in Indira Nagar Dehradun. All the material is from Tata company, in which the pillars are of 1.6 mm sheet thickness and all others are of 1.2 mm sheet thickness.

Tata has started making .45 mm sheets available here. Earlier it took a lot of time to order Tata sheets, now a plant has been set up in Roorkee where you will get the desired size, the price of the sheet is now Rs 46 per square feet. The main reason for using Tata is the AZ170 coating of the sheet which keeps its colour intact forever. The accessories used in it are also from Tata. We have only customized the WPC screen.

The shed is built in hut shape but the center is slightly out. In which the center of the shed was taken to the Mamti, due to the higher height in the middle, the sheet came on the parapet of the Mamti, due to which downpipe or gutter did not have to be provided. So that leakage can be avoided in future.
We have provided a separate cover at a little height above the stairs so that you can easily reach the shed and also do the cleaning work on the shed.

This work is done by our experienced craftsmen, we have also installed PVC pipes, covered the base plate with RCC and also installed sheets on the front and rear truss. 12mm insulation is used manually in the niche of sheet which has made a lot of difference in heat and sound. Generally 8mm high insulation is installed from factory. The cost of the shed is approximately ₹200 per sqft.

If you also want to get a roof shed installed or want to do any other project with us, then contact us on 7060504666. We have a workshop at Maya Vihar, Sahastradhara Road… Do subscribe to stay connected with us. Thanks for your time.

Posted on by — Leave a comment

Tin Shed Work in Bhiwani Sheeshwala for Bhavesh Ji

This beautiful work has been done by Atesham Bhai, who is the most experienced craftsman in our team. This work took a whole month in which we made two gazebo sheds of 40 x 40 feet and made two hut-shaped sheds. We completed the project at the rate of Rs 200 per sqft, in which we charged Rs 20 extra for insulation. This includes both material and labour. The party itself got the work of paint, primer and PVC Downpipes.

3 Types of Tin Sheds fabricated at Sheeshwala, Dadri, Bhiwani, Haryana

The difference in length and width of the shed was adjusted on the ridge in the center so that the right side sheet of the shed could be put on the left side. Due to this the sheet wastage in the shed became nominal. We got all the material from Panchkula where Supersteel delivered good quality Green colour sheets directly to Bhiwani and we were able to complete the job. We used full sheets including sheets more than 22ft long for this work and also made the gutter in such a way that no rafter or truss was visible from the sides. In Jhallar we used our 12mm WPC whose height is 9in, this gave a better look to the shed.

The owner, Bhavesh ji is a very good and sensible entrepreneur. He was fully aware of his needs, we just worked according to his requirements. We have also placed huts in this shed which has brought life to it. There are huts in the shed for air and light, many people keep it separate from the top and the shed is closed from the bottom, this is a completely wrong way of working.

We used .47 inch thick sheet of Apollo and used 8mm insulation here. Perlin pipe hamne 1.5in square rakha jisko 33in ke gap par rakha gaya. If you need any more information, you can call us at 7060504666. We operate from Dehradun Sahastradhara and provide services all over India.

 

Posted on by — Leave a comment

Sodha Saroli Tin Shed for Dev Singh Ji – 2500sqft

Hut Shape Tin Shed in Dehradun
  • Area – 2500 sqft (42ft wide and 60ft depth)
  • Clear Height – 10ft from Floor
  • Structure Material – APL Apollo 18g Sections (Pillar 100mm sq, Truss 75mm by 40mm, Ladder 40mm sq, Perlin 40mm sq)
  • Sheet – .45mm Apollo Red, AZ Coating 50
  • Gutters – 6in by 4in
  • Ridge – 14in
  • Jhallar – WPC 12mm Customized
  • Red Oxide – Berger
  • Paint – Asian Enamel Black Color
  • RCC – 1ft Grouting of Pillars
  • Ladder – Separate Ladder for shed and solar maintenance
  • Solar Area – 20ft by 20ft with additional perlin pipes at the gap of 1.5ft
  • Center Height – 42inches
  • Time 15 days.
  • PVC Downpipes – 100mm 2.5kg pressure 20ft length with labour
  • Rate – Rupees 150 per sqft.