Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).Side Jali Size: 6ft width and 7ft Height. Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain
Jali Size: 4×4 – 3 Blocks Material: Black Cobra 18mm WPC Framing: 1″ MS Pipe Apollo Enamel Painted – Asian Paint Covering: 12mm Toughened Glass – Saint Gobain
Door Size: 7.5ft by 38inches Material: Choukhat Saal 6″x3″ Board – Action TESA 18mm Plyboard Duco Finish Paint on CNC Gloss Polish on Other Part
Leaf CNC Design in Zigzag Shape Material: Wooden Frame 6″x3″ WPC 18mm Black Cobra HD Frame 1″ Apollo Pipe
We always feel good working with engineers, it adds more to our work. The same happened in this work, in this we have used good material, but made a better design than that. It was tough job that the window sizes were not standard. So there was sheet wastage, we had to work with the joints. We managed the joints very well, you may see in the images.
Villa Facade designed in Dehradun for Mr. Rupam Bhatia Dehradun
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).This site is my favorite site. We have used best of each and every material in this work. There are 12mm Italian Marble with Back Strip Light of Phillips Brand and Granite Counter Top.Mantra written with 3mm Golden Mirror Acrylic and Base Sheet is white ACP A-Cast Brand. Cabinets made with Action Brand HDMR 19mm and SF Mica .8mm Thicker on Cover.Gate is made with Action MDF 18+12 mm with Both side SF8078 Mica. Side covering with Action HDMR 18mm with Marino Laminate on Front Side.Sides designed with Om Jali in WPC 18mm Brand Black Cobra with CNC Router and white sheet used 2mm A-Cast Milky White and Phillips LED Strip used is Phillips 50mtr Roll
By the way, whatever work has been done, it is getting better than the previous one .. But now the experience of doing this work was very good, in this we got the opportunity to use the materials of the world’s best brands. The best is how the light reflects from behind the marble, it was a great experience. It is expensive but nothing can match it, you can see in the image.
It took only 60,000 rupees of material to build a temple of just 5×6 feet. And the rest of the labor cost is different. So this temple was built at a cost of about 1.2 lakh rupees. In this, everything done from Duco paint is done in almost the entire house. Marble cost extra paid by the customer, marble was costing Rs. 60,000/- for this mandir design.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Sahastradhara Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
Om Design CNC – 8mm painted with Normal Golden Color
Om Namay Shivay written with 3mm Acrylic – Red
Duco Painted 12mm WPC Sheet Partition
Fitted with MS Pipe 1×1 inch with White Paint.
8mm MDF Painted with normal dark blue paint
This work has been done for a very good architect who has just completed his studies, he has recently built a house in Dharampur, the whole house has been built by mixing modern and traditional themes. However the house looks very cute. In this, he made a small budget and the finishing came out fantastic.
It has a Green company MDF board which is 8mm, we had a lot of trouble in doing this work, if the board was 12mm then it was better. After that whatever the design was, it was Sharaddha ji who did the final after that, after harvesting, we had the goods reached his house. Then he painted his own painters with his painters and called us to fix them. The smile was the most difficult in this, and had to work hard to match it.
He had to apply Asian paint with white silicon, which was not a permanent solution. Bidding is the best option for him, but nowadays a sheet is being installed in this way only, so we also put it like this. After that, the sheet behind the temple is an acrylic sheet of white color A-Cast company which is 2mm thick. The kitchen partition that has been forged in it is a 12mm sheet of the Black Cobra Company on which they have painted. All the sheets are fixed with steel screws.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). This partition has been done for a doctor who lives in Prem Nagar, is a very young and new person. His taste is also good about design. He did some things in his own way while working, which made the work more beautiful. The total cost of doing this work was 21 thousand rupees, which includes the WPC sheet and all the ply and fittings.
32mm Thicker Plyboard used.
In this, we used Green‘s ply 18mm which had to be doubled, so that its thickness was 36mm, which is very important, you can also see our other work, in this kind of work, we always start by double ply board. After that, the laminate that we have applied in it is different on both the sides, on one side there is white laminate and on the other side in wooden finish, the cast is about 600 rupees per sheet. The LED Cov lights which are also included in it are from Crompton which is guaranteed for one year. You had to smile a little, you can see that no wire is visible, it has been wired to the board itself.
CNC Door Partition in Dehradun
After that you can see the slider we have slide the CNC Cutting Sheet in the video. Which is giving this design a better look, while there is no need for a slide, only the slider has been used to give it a freedom. The sheet that we have fitted in it is of Black Cobra Brand.
After that its sheet has been cut with Prince CNC Router which is done by 3mm Endmill tool which gives the best finish. The sheet used is high density wood and fiber sheet which is waterproof.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). We got an opportunity to build a temple for my friend, we did a very good job and you can see in the photo that this temple has been prepared at a very low price, which cost only 20 thousand rupees. Because the wood that was to be put in the frame was already lying with them for the year, otherwise it would have cost upwards of 25 thousand.
7×4 Mandir Design using CNC, WPC, Mica, Board, Plywood
The cabinet it is made of is made from 18mm plywood. Which belongs to the Green Company. After that, both types of mica .4mm in and .75mm have been put on it. Fitting has also been used well in this.
18mm WPC for Om Design and 12mm WPC for side jali
The 6 design in it is cut on an 18mm cobra sheet and the sheet on the side is of 12mm, although I suggest that a sheet of less than 18mm should not be used. After this, the LED strip installed is the original of Havells which comes with a one-year guarantee.
19mm Board with Colored Texture Mica on Front and White Mica inside
The most beautiful look in it is of the door, which is made of 19mm board, white on the inside and colored mica on the outside. The bells in it are of brass which are fitted with M hooks.
Bells used with M Hook
It took a full time of one week, the size of the temple is 7 feet high and 3.5 feet square. It is most lovely when the door opens, then the sound of bells comes and its entire white is from inside.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). Vijay ji works in a software company. His house is near Touchwood School on Sahastradhara Road. There are flats on both sides in the balcony due to which the privacy was disturbed. For this, they needed a partition that looked good and also cheap. In this partition, we have used two sheets, the top sheet is 12mm and the back 6mm thicker.
The top sheet has been cut with the help of CNC machine. And the back sheet has been fixed as it is. The Iron Framing was already done by the builder, with the help of star screw, the sheet has been attached. In this we have applied 1″ screws. The screw is placed at a distance of 2 feet.
The most difficult task in this was to mix the sheets together because the size was large. Our job’s width was 6 feet and 9 feet while the sheet is 4 feet and 8 feet. You can see in the photo how the sheet has been installed so that the design is also maintained. In this, if the LED light on the side went around, then the view could be better. But it has to be done according to the budget of the client.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
ACP Golden Letters installed for a Local Trader of Iron and other metals located on Mussoorie Road, Dehradun. ACP thickness was 3mm and letter raising of 1inch.
Acrylic letters pasted on texture wall with the help of 3M double tape. Letters thickness was 6mm.
Eco Van branding done for Himalayan Power Machines located at Dalanwala Dehradun with Eco Printed vinyl.
Standee designed and printed for Sahastradhara Heights a local real estate project located on Sahastradhara Road, Dehradun.
Complete branding like glass stickers, LED Board and all stationary designed for Face Mile Dental Clinic located on EC Road in Dehradun.
Glow sign board with LED Tubes provided to City Smiles Dental care clinic located on Subhash Road Dehradun
Glow Sign Board designed and installed for IT Fames an IT Institute located on Raipur Road, Dehradun.
LED Board designed and installed on Rajpur Road for Mount Strong a brand new Gym on Rajpur Road.
LED Board with Stand installed in Prem Nagar for a Chemist near Kamal Nursery, Dehradun.
Steel Name Plate designed for a Villa Owner in Panache Valley Dehradun located on Sahastradhara Road.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services. Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666). Recently, a client of Hathibarkala, Dehradun demanded from us some special name plates of wood. He needed some antique and some durable work. For that, we designed a special name plate, for which first the ACP material plate was given a special shape with the help of CNC machine, which you can see in the photo.
Specially Designed Name Plate on ACP Wooden Finish Base with Golden 3mm Acrylics
In this, we designed the plate for both the poles, on one side, we designed Ganesh, in which also put the house number below. And on the other side, in whose name Rawat ji put his details. The client’s father finalized this design, after which we started work. The board on the side was made in the same way by picking up the golden colored acrylic letters on the ACP of Alex Brand, but here are some designs that you can see in the image below.
Specially fixed with Heavy Studds on Tiles.
The client liked the job very much, the cost of the job was only Rs 3,500 and we installed it within only 4-5 days. If you too are making some special plans for your home, you can meet us, we work on Sahastradhara Road inside Mandakini Vihar.
Name Plate fixed with Hammer and Drill by our own team.
Apart from this, if you need any service from us like we do CNC and Laser cutting, also design the interior for the house and any work related to branding for your office, you can get us done, for more information you can Can view on our product page .: OUR PRODUCTS
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
We have designed special WPC/Metal (Brand: Alstone) with Golden and White Acrylic (Brand: A-Caste) Letter’s name plate for Hathibarkala based client in Dehradun.
Special 18mm WPC Boundary Wall Jali Installed with Stainless Steel Framing on Mussoorie Rd, Dehradun in the House of Mr. Sanjay Choudhary Ji (V.S. Buildcon).
Material: 18mm WPC of Cobra in High Density
Weight: 25kg/board
Cutting Machine: Prince Router 6kw
Bit Used: 3mm
18ft by 6ft Jali Installed with acrylic sheet on the backside to block the view from bothside.
Designed Special Name Plate for Sahastradhara Road Based Client in Acrylic Metal with Silver Chain.
Doon Projects – Interior Designer and Construction company in Dehradun (Sumit Pundir @ 7060504666).
Something different had to be made and the biggest thing was to make it in a wooden finish which could not be spoiled even by water.
ACP + Acrylic Name Plate designed for MB Homes, Dehradun
We did some work in a township named “MB Homes located on Sahastradhara Road, Dehradun” and the owner of this apartment building liked it, he called us to a meeting and asked us to make a sign in round shape in some wood. But the biggest problem was that it could be damage in water if it was in the wood. First, we gave them an option that we will be coating on Pine Wood and Saal Wood so that it does not deteriorate. But the option was not worked.
Then we told about the ACP sheet of Alex Brand in which the wood texture comes and sent them some photos in which the item was shown on the photo itself. The client liked it and in the photo above you can see how good the work looks. In this, we raised the letters from a 3mm acrylic sheet of white color.
Side images of the Name Plates made by ACP and Acrylic Letters in wooden look
It was looking great because in this we used 1.5 inch Studds. They were used to make the plate rise up from the wall and to maintain the 1 inch gap in the middle. In this, we also put screws in the star, in which there is no problem of rust. You can see the fixing accessories in the image below.
Studs, Bidding and Star Screw used in MB Homes Name Plates.
If you are also looking for service then contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services.
Feel free to call us to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.
Call us to schedule a meeting now: +91-7060326021, 7060504666 (Amit Pundir). Office Location - Sahastradhara Rd, Dehradun. Dismiss
