Posted on Leave a comment

LED Sign Board for Complex at Jogiwala

This work has been done for the launch of a complex which is in Jogiwala, although seeing the design, you may find the work seem normal, but there is a special thing in it that the letterer in it has also embossed.

In the image below, you can see that the Ohm Sign we have designed a little better way.

LED SIGN Board for Jogiwala Complex in Dehradun
We have designed these boards for Jogiwala Based Complex. We have used Alex base and acrylic letters with Samsung brand LEDs inside.

There were two different boards board one size specifications are:

LED Sign Board 1:

  • 10×2.5 Alex Base in Matte Black Finish
  • Logo and Om sign in 8mm embossed acrylic in the same color.
  • All other letters is 4mm embossed with Alex material.
  • They did not have logo so we redesigned it.
  • Costing was INR 15,500 + taxes*.

LED Sign Board 2:

  • 10×4 Alex base in Red color.
  • Ashirwad is 8mm embossed with Acrylic material and Samsung LED light inside.
  • Costing was INR 20,000 + taxes*.

Continue reading LED Sign Board for Complex at Jogiwala

Posted on Leave a comment

LED Board Types and Costing Estimates

The price of any LED board depends on its material and the size of it. The size of a normal led board starts at 8 x 4 sq.ft., after which anything can happen. The price of a normal board starts from just INR 15000 (US$ 200). There are two main things seen in this.

  1. The main part is the material used for the sign. It consists mainly of Acrylic, Alex, Crystal. Three types of materials are shown in the image below.  Its rate is measured according to Square Inch, not square-Feet and cost starts at INR 100 per Square-Inch.
    LED Board Material and Costing Details
    Normal size of board is 8×4 Sq.Ft. Costing is totally depend on logo or letter complexity.

    The thing to see in it is that the light goes through the acrylic, but not inside of Alex and the crystal has a different brightness.

  2. And secondly, the most important thing is its base.  If you want to cross the light from the back, use acrylic and if want matte finish then Alex will be used.
    LED Board Base Material Costing
    There are different types of material to be used in base. We have shown 4 major options.

    Get your quick quote by clicking here: QUOTE – Branding Solutions

    Contact in office hours 10:00 am to 6:00pm. Our satellite office is located on Rajpur Road, visit us for best understanding. Click here to check our previous works and available services.

    Feel free to call at 99978-33350 (Mr. Sumit Pundeer)  to schedule a meeting with us or at your place. Thanks for your time, we will highly appreciate if you will share these information in your network.

    Wishing great day ahead.